Structural Flakeboards and Composites 



3069 



Jorgensen, R. N. 1978. Requirements, codes, 

 and Forest Service goals. In Structural flake- 

 board from forest residues: symp. proc, 

 Kansas City, Mo., June 6-8. U.S. Dep. 

 Agric. For. Serv., Gen. Tech. Rep. WO-5, 

 p. 10-12. 



Jorgensen, R. N. and R. L. Odell. 1961. Di- 

 mensional stability of oak flake board — as 

 affected by particle geometry and resin 

 spread. For. Prod. J. 11:463-466. 



Kasper, J. B., and M. N. Carroll. 1979. Linear 

 expansion of particleboard decking under 

 site-built exposure conditions. For. Prod. J. 

 29(5):49-52. 



Kasper, J. B., and S. Chow. 1980. Determina- 

 tion of resin distribution in flakeboard using 

 X-ray spectrometry. For. Prod. J. 30(7):37- 

 40. 



Kehr, E. 1979. (Influence of bark during the 

 use of unbarked wood in the surface layers of 

 particleboard.) Holztechnol 20(l):32-39. 



Keil, B. 1980. Single-step veneer/particle- 

 board composite enters market. Plywood 

 and Panel Mag. 20(11): 10-11. 



Kelly, M. W. 1977. Critical literature review 

 of relationships between processing param- 

 eters and physical properties of particle- 

 board. USD A For. Serv. Gen. Tech. Rep. 

 FPL- 10, 64 p. For. Prod. Lab., Madison, 

 Wis. 



Kelly, M. W. and R. G. Pearson. 1977. Prop- 

 erties of veneered southern pine low-density 

 fiberboard from hardwood total-tree chips. 

 For. Prod. J. 27(9):28-37. 



Klauditz, W., andG. Rackwitz. 1952. Investi- 

 gations on the process of curing chipboard 

 panels. Proc, Conf. Working Comm. 

 "Chipboard Panels" Deut. Ges. Holzfors- 

 chung. Braunschweig, Germany. 



Koch, P. 1972. Utilization of the southern 

 pines. U.S. Dep. Agric. For. Serv., Agric. 

 Handb. 420. 1663 p. 2 vol. U.S. Govt. 

 Print. Off., Washington, D.C. 



Koch, P. 1978a. Five new machines and six 

 products can triple commodity recovery 

 from southern forests. J. For. 76:767-772. 



Koch, P. 1978b. Production opportunities in 

 four southern locations. In Structural Flake- 

 board from Forest Residues, Proc, Symp., 

 June 6-8, Kansas City, Mo. U.S. Dep. 

 Agric, For. Serv. Gen. Tech. Rep. WO-5, 

 Washington, D.C. p. 150-165. 



Koch, P. 1978c. Shaping-lathe headrig can 

 profitably yield short cants or flitches and 

 structural flakeboard panels from small-di- 

 ameter hardwoods. Pap. FID-II/21-2 pre- 

 sented at Eighth World For. Congr. , Jakarta, 

 Indonesia, Oct. 16-28. 23 p. 



Koch, P. 1978d. Two methods of acquiring 

 residual wood for southern flakeboard 

 plants: The shaping-lathe headrig and the 

 mobile chipper. In Structural Flakeboard 

 from Forest Residues, Proc. , Symp. , June 6- 

 8, Kansas City, Mo. U.S. Dep. Agric, For. 

 Serv. Gen. Tech. Rep. WO-5, Washington, 

 D.C, p. 39-46. 



Koch, P. 1982. Non-pulp utilization of above- 

 ground biomass of mixed-species forests of 

 small trees. Wood and Fiber 14:118-143. 



Koch, P., and R. A. Caughey. 1978. Shaping- 

 lathe headrig yields solid and molded-flake 

 hardwood products. For. Prod. J. 28(10):53- 

 61. 



Koenigshof, G. A. 1979. Economic feasibility 

 of manufacturing Com-ply panels in the 

 South. COM-PLY Report 17. U.S. Dep. 

 Agric. For. Serv. Res. Pap. SE-201. 28 p. 



Koenigshof, G. A. 1981. Economic feasibility 

 of manufacturing COM-PLY joists using 

 hardwoods. In Symp. Proc, Utilization of 

 low-grade southern hardwoods — feasibility 

 studies of 36 enterprises. Nashville, Tenn., 

 Oct. 1980. (D. A. Stumbo, ed.) For. Prod. 

 Res. Soc, Madison, Wis., p. 208-213. 



Lehmann, W. F., R. L. Geimer, and F. V. 

 Hefty. 1973. Factors affecting particleboard 

 pressing time: interaction with catalyst sys- 

 tems. USDA For. Serv. Res. Pap. FPL 208, 

 20 p. For. Prod. Lab., Madison, Wis. 



Lei, Y. K., and J. B. Wilson. 1980. Fracture 

 toughness of oriented flakeboard. Wood Sci. 

 12:154-161. 



Lloyd, D. D., Ed. 1981. Phenolic resins- 

 Chemistry and application. Proc, Weyer- 

 haeuser Science Symposium 2, Tacoma, 

 Wash., June 6-8, 1979. 329 p. 



Lyon, D. E. and P. H. Short. 1977. Effects of 

 furnish type on properties of thin, reconsti- 

 tuted wood panels. For. Prod. J. 27(3):38- 

 44. 



Lyons, B. E., J. D. Rose, and J. R. Tissell. 

 1 975 . Performance of plywood and compos- 

 ite panels under concentrated and impact 

 loads. For. Prod. J. 25(9):56-60. 



