Pulp and Paper 



3145 



Hankin, J. W., W. J. Leidigh, and E. W. Step- 

 hansen 1970. Microwave paper drying ex- 

 perience and analysis. Tappi 53:1063-1070. 



Harlow, W. M. and L. E. Wise. 1928. The 

 chemistry of wood. I. Analysis of wood rays 

 in two hardwoods. J. of Ind. Eng. Chem. 

 20(7):720-722. 



Hart, T. L. 1980. The potential for expanded 

 use of hardwoods for pulp and paper. Pre- 

 sented at John S. Wright For. Conf., Feb. 

 28-29. 20 p. (Available from Champion 

 Timberlands, Stamford, Conn.) 



Herdman, R. 1970. Paper drying features of a 

 modem computerized machine. Tappi 

 53:1007-1009. 



Hergert, H. L., R. B. Hammer, and A. F. 

 Turbak. 1978. New methods for preparing 

 rayon. Tappi 61(2):63-67. 



Higgins, H. G. 1969. Long and short fibers for 

 papermaking. Papel 30(5):35-40. (Port.) 



Higgins, H. G., J. de Yong, V. Balodis, F. H. 

 Phillips, and J. Colley. 1973. The density 

 and structure of hardwoods in relation to pa- 

 per surface characteristics and other proper- 

 ties. Tappi 56(8): 127- 131. 



Higgins, H. G., C. P. Garland, and V. Puri. 



1977. Thermomechanical and chemithermo- 

 mechanical pulps from eucalyptus and other 

 hardwoods. Appita 30:415-423. 



Higgins, H. G., V. Puri, and C. Garland. 



1978. The effect of chemical pretreatments 

 in chip refining. Appita 32:187-200. 



Horn, R. A. 1974. Morphology of wood pulp 

 fiber from softwoods and influence on paper 

 strength. Res. Pap. FPL 242, U.S. Dep. 

 Agric, For. Serv. 



Horn, R. A. 1978. Morphology of pulp fiber 

 from hardwoods and influence on paper 

 strength. USDA For. Serv. Res. Pap. FPL 

 312, 8 p. For. Prod. Lab., Madison, Wis. 



Horn, R. A. 1979. Bonding in press-dried 

 sheets from high-yield pulps. The role of 

 lignin and hemicellulose. Tappi 62(7):77- 

 80. 



Horn, R. A., and D. L. Coens 1970. Rapid 

 determination of the number of fibers per 

 gram of pulp. Tappi 53(1 1):2120-2122. 



Hunt, K., and J. V. Hatton. 1976. Increased 

 pulp production by use of hardwoods in 

 softwood kraft mills. Pulp and Pap. Can. 

 77(12):1 19-123. 



Hyttinen, A., and E. R. Schafer. 1955. Grind- 

 ing pretreated hardwoods: experiments on 

 quaking aspen, sweetgum, red alder, black 

 tupelo, sugar maple, red oak, and cotton- 

 wood. U.S. Dep. Agric. For. Serv., FPL 

 Rep. No. 2014. For. Prod. Lab., Madison, 

 Wis. 20 p. 



lannazzi, F. D., and R. Strauss. 1970. Com- 

 parative manufacturing costs for wet-laid 

 and dry-laid materials. Tappi 53: 1026- 1028. 



Janett, L. G. 1970. Profile correction and eco- 

 nomics in drying of paper. Tappi 53:981- 

 988. 



Kato, Y. 1961. Japanese start-up new NSSC 

 mill. Pulp and Paper International 3(6):21- 

 24. 



Keays, J. L., and R. A. Leask. 1973. Refiner 

 mechanical pulp — past, present, and poten- 

 tial. Pap. Trade J. 157(35):20-29. 



Keller, E. L., and D. J. Fahey. 1956. Neutral 

 sulfite corrugating boards from southern red, 

 scarlet, and black oaks. USDA For. Serv. 

 FPL Rep. No. 2067, 10 p. For. Prod. Lab., 

 Madison, Wis. 



Keller, E. L., R. M. Kingsbury, and D. J. 

 Fahey. 1959. Boards and papers from short- 

 leaf pine, black tupelo, and southern white 

 oak neutral sulfite semichemical pulps. 

 USDA For. Serv. FPL Rep. 2141 , 20 p. For. 

 Prod. Lab., Madison, Wis. 



Kellogg, R. M. and F. F. Wangaard. 1964. 

 Influence of fiber strength on sheet proper- 

 ties of hardwood pulps. Tappi 47(6):361- 

 367. 



Kennedy, W. H. 1970. Water removal by twin 

 vertical wires. Tappi 53:974-975. 



Khandelwal, K. K. 1970. Relationship be- 

 tween sheet formation and dryer section per- 

 formance. Tappi 53:971-972. 



Kibblewhite, R. P., and D. Brookes. 1977. 

 Fibre, beating, and papermaking properties 

 of kraft pulps from New Zealand beech 

 (Nothofagus) species. New Zealand J. For. 

 Sci. 7:425-444. 



Kijima, T., and I. Yamakawa. 1978a. Effect of 

 shrinkage during drying on dimensional sta- 

 bility of paper. Japan Tappi 32(10):584-592. 



Kijima, T., and I. Yamakawa. 1978b. Effect of 

 beating condition on shrinkage during dry- 

 ing. Japan Tappi 32(12):722-728. 



Kleppe, P. J. 1970. The process of, and prod- 

 ucts from, kraft pulping of southern pine. 

 For. Prod. J. 20(5):50-59. 



Kleppe, P. J. 1978. Progress in high-yield 

 Kraft pulping. In Complete tree utilization of 

 southern pine: symp. proc. New Orleans, 

 La., April 17-19. C. W. McMillin, ed. For. 

 Prod. Res. Soc, Madison, Wis., p. 249- 

 256. 



Klungness, J. H., and N. Sanyer. 1981. Hard- 

 wood pulp utilization. Separation of nonfi- 

 brous oak components. Tappi 64(2): 109- 

 113. 



