The Shot Gun Cleaner 



Fits any 10, 12 or 16 Guage Gun. 



It is expanded by pressure applied to lever at 

 the handle. Being under perfect control, is 

 made to conform to the varying diameters oj 

 gun, in chamber, barrel and choke , and at any 

 pressure desired. 



A cleaning rod in three joints, of the usual 

 length, carrying within steel rods movable by clos- 

 ing a lever at the handle. 



End of rod in cleaner section has a cone to ex- 

 pand three spring brass fingers of cleaner. 



By making a Heaner that is part of and not re- 

 movable from the rod, we bring a new departure 

 and insist, a valuable one. 



The cleaner pads are made by stringing 30 guaze 

 washers on a brass holder, these being compressed 

 in forming die to proper shape to conform to in- 

 side circle of barrel, and making a surface that 

 holds the cloth patches firmly. The adjusment 

 being under control in chamber, barrel or choke, 

 at any pressure desired, by movement of the lever. 



One thickness of cloth, about three inches square, 

 makes a perfect swab. 



The pads are held in place by a turn-over hook 

 at end of cleaner fingers and by a screw at rear; 

 are easily removed if desired, but owing to con- 

 struction, described above will clean one gun every 

 day for several years. While the firm manner in 

 which the pads hold cloth to gun barrel removes 

 all but most obstinate deposits of lead and rust, a 

 moment's use uncovered will do this completely. 

 A patch oiled with { 

 pure vaseline or 

 Gun Greasen 

 makes a per- 

 fect job. 



