mTnTDmrmrmTmrTTTnii 





Louden Carry- All Sling Carrier Fig. 1103 



Specifications 



The heaviest and 



s t ron gest Hay 



SHng Carrier made 



For use in any type 



or size of barn. 

 Built to operate on 



Louden Double 



Bead Steel Track. 

 Diameter of Rope Wheel in carrier, 10 inches. 

 Diameter of Rope Wheel in sling pulleys, 4 inches 

 Rope Wheel in carrier is roller bearing. 

 Diameter of Track Wheels on tread. 3 inches. 

 Track wheels are not roller bearing. 

 Bearing surface on track (distance between front and 



rear axles), 191 2 inches. 

 Total length of carrier, 22 'i inches. 

 Carries slings within 26 inches of the track. 

 Frame of carrier of refined malleable iron. 

 Rope and track wheels special quality gray iron. 

 Safe working capacity. 2,500 pounds. 

 Seven-eighths inch best manilla rope is recommended 

 Three-quarter inch rope may be used. 

 Two Sling Pulleys. 1 Trip Block, 2 End Stop Blocks furn 



with each earner. 

 Weight. 77 pounds. 



(See pages 30 and 31 for Track and Track Fittings.) 



The Carry-All Hay Sling Carrier, as its name 

 implies, was built to carry big loads of all kinds of 

 hay. The importance of the hay crop and its 

 increasing value from year to year is resulting in a 

 larger acreage and more tons of hay in all the hay- 

 growing regions. The necessity of being prepared 

 to handle the hay with speed and safety when the 

 weather is right and the hay is right has developed 

 the need for heavier equipment. 



In many of the heavy hay-growing sections 

 farmers are building larger barns and with roof 

 construction strong enough to permit an entire 

 wagon load of hay to be handled at a single lift. 

 With a desire to furnish a carrier that would do 

 this work in the big hay barns and at the same 

 time be suitable for use in the ordinary farm barn 

 we designed the Carry-All Sling Carrier. 



This carrier has been tested under loads weighing 

 3,200 pounds. It has been tried with horse power, 

 engine power, and electric power. It has been tried 

 out in barns of all sizes and under all kinds of conditions. It is already 

 barns and in every test the carrier proved its efficiency, its strength, and its 



Fig. 523 



Illustration shows our 

 patent End Stop for Double 

 Bead Steel Track. Two are 

 furnished with the Carry-All 

 Sling Carrier. 



Fig. 1103 (Heavy) 



Patent ^ending 



Fig. 1123 

 Trip Block for Carry-All 

 Sling Carrier. One is fur- 

 nished as a part of each 

 carrier. 



making good in hundreds of 

 perfect working mechanism. 



Non-Wear Rope Lock 



The Rope Lock in this carrier is positive and sure. There is no chance for the rope to slip. The lock 

 will not wear the rope as it grips it evenly. The Rope Lock castings have a bearing of 9 inches on the 

 rope. They conform to the diameter of the Rope Wheel and when the Rope Lock goes into action engaging 

 the rope for a distance of 9 inches and bending it around the outside of the Rope Wheel the rope cannot 

 slip. Handling a dead weight (steel pipe) of 3,200 pounds the rope did not slip the fraction of an inch. 



The end of the draft rope is knotted into the cup-shaped rope swivel which rests in the fulcrum lever. 

 The fulcrum le^er exerts a direct pressure on the rope lock. When carrying a load the weight of the load 

 is held on top of the rope lock. The heavier the load the more securely does the lock hold. 



Page Fourteen 



