Louden Simplicity Cow Stall — Fig. 951 



We do not recommend any wood parts for cow stalls, especially since Government Inspectors in deal- 

 ing with the recent outbreak of the foot-and-mouth disease have in some instances ordered the tearing out 

 of all wood fixtures in dairy barns. Nevertheless, there may be some parties who have timber of their own 

 which they can use and who can possibly save some money by so doing. To such parties our Simplicity 

 Stall will appeal. It is inexpensive, and at the same time is in a certain measure, sanitary — easy to clean 

 and easy to keep clean. 



The posts are made of 2 x 6, and the top-rail of 2 x 4 timbers. They should be dressed and painted to 



make them easy to clean. The mangers and the curb should be of concrete, and if wood scantlings are 



used for the curb, the space between them should be filled with concrete to prevent it from filling with 



objectionable matter. o -ti ..• 



' bpecincations 



Metal Parts. We furnish only the Metal Parts as 

 follows: Stall Partitions; Flanges to connect upper ends 

 of partitions to stall posts; Stanchions; Bolts to connect 

 upper ends of stanchions to top-rail; Guides (or hold-open) 

 for stanchions; Stanchion Anchors. When wood floors are 

 used or cement floors are already in. Floor Flanges will be 

 needed, also Anchor Bolts. We do not furnish the bolts 

 to join the wood parts together as they can be procured at 

 any hardware store. Directions are furnished for making 

 and setting up stalls. 



Illustration shows our No. 3 Stall Partition which we 

 recommend and will furnish unless our No. 2 or No. 5 par- 

 titions are specified. (See Fig. 994, page 79.) Also, our 

 Tubular Steel Stanchions which we recommend and will 

 furnish unless otherwise specified. There will be an extra 

 charge for either the Five-in-One or Quick Adjustable Stan- 

 chions, but no extra charge for our Wood-Lined Stanchions. 



Finish. All the parts except the U bolts for stanchion 

 anchors, which are sherardized. are coated with our Sf)ecial 

 Dairy Barn Paint or, if so ordered, will be galvanized at 

 extra prices given. 



Cut shows three stalls and one End Section. When there 

 is an alley at each end of a row of stalls, an extra End Section 

 will be required for which an extra charge will be made. 



Simplicity Fittings, complete for each stall, consist of 

 1 Stall Partition; I Post Flange; 1 Tubular Steel or Wood-Lined 

 Stanchion; I Bolt to connect stanchion to top-rail; 1 Guide or 

 Hold-Open for stanchion: 1 Regular Stanchion Anchor. 



Simplicity End Section, complete, consists of I Stall 

 Partition and I Post Flange. 



Weights. Fittings for stall weigh 31 lbs.; End Section, 

 18 lbs. 



Special. When the stall is to be set on a wood floor 

 or on a cement floor already in, the lower ends of the par- 

 tition will have to be cut 5 inches shorter and floor flange 

 will be required together with lag screws for the wood floor 

 and anchor bolts for the cement floor. 



Page Ninety-one 



