rrTTTrm 



jjiiii^^lJ^T^tiLiM 



rAIRFIELD. lONVA 



Louden Tubular Steel Gates 



Fig. 1169 

 is the Louden 

 Heavy Tubu- 

 lar Steel Gate 

 with patent 

 Ad justabl e 

 Center Pivot 

 Hinges and 

 heavy Hold- 

 Shut Twin 

 Latches, suit- 

 able for bull 

 pens and other 

 places requir- 

 i n g great 

 strength. Fig. 

 1 170 is the 

 L o u d e n 

 Standard 

 Tubular Steel 

 Gate with 

 Adj us tab 1 e 



Center Pivot Hinges and a Single Hold-Shut Latch, suit- 

 able for maternity pens, calf pens and similar uses. These 

 gates are made of the best quality of steel tubing. For strength and durability as well as neatness, con- 

 venience and cleanliness, these gates have no equal. 



Fig. 1170 



Fig. 1169 



Specifications 



Sizes of Tubing. The frame of the Bull Pen Gate is 

 made of I J^ and the fillers of I ? s O. D. steel tubing. The 

 frame of the maternity pen gate is made of 1 * g and the 

 fillers of 1 1^ O. D. steel tubing. The frame of the calf pen 

 gate is made of I % and the fillers of I A O. D. steel tubing. 



Fig. 1171 



Dimensions. The standard size of Bull Pen Gate is 

 3 feet 5 inches wide and 4 feet 8 inches high; Maternity Pen 

 Gate, 2 feet 1 1 inches wide and 4 feet high, and Calf Pen 

 Gate, 2 feet 5 inches wide and 3 feet 4 inches high. All 

 measurements are from out to out of frame. 

 Hinges and Latches. The Hinges described on another page, will be fur- 

 nished in the heavy size for the bull pen gates and in the standard size for 

 the maternity and calf pen gates. The Latches for the bull pen gate are 

 made of rs"' 's steel bars doubled back as shown in the cut. For the mater- 

 nity and calf pens the Latch is made of J^xlJ^ steel bar. doubled back the 

 same way. 



Weight. The standard Bull Fen Gate complete with hinges, latches and 

 hold-shut catches, weighs 128 lbs.; Gate for maternity pen with hinges, latch 

 and catch, weighs 84 lbs. : Gate for calf pen, with same fittings, weighs 58 lbs. 



Louden Improved Alley Gate 



Fig. 1171 is the Louden Improved Alley Gate with vertical fillers 

 and a latch that will slam shut from either side and never swing 

 past. This latch is absolutely stock-proof. No cow or horse 

 can by any possibility open it. It is furnished with hinges which 

 will swing both ways. 



Specifications 



The Standard Sizes of Alley Gates are 3 ft. 4 in. high 

 and 2 feet 1 1 inches, 3 feet 5 inches, and 3 feet 1 1 inches wide, 

 out to out. These sizes are suitable for alleys 3) j. 4 and 4}4 

 feet wide in the clear. Other sizes will be made to order. 



Sizes of Tubing. The frames are made of l^s O. D. 

 tubing and the fillers are 1 ^^ O. D. tubing. The fillers 

 are spaced on centers 8 to 9 inches apart. 



Weights. With latch and hinges and two collars, 

 which go with the gate, the 2-foot II -inch size weighs 57 

 lbs.; 3-foot 5-inch size, 65 lbs., and 3-foot 1 1 -inch size, 73 lbs. 



Page One hundred thirty-two 



In ordering be sure to specify the outside diameter of 

 posts. If different sizes are used, give size to which the 

 gate is hinged and also size of post to which the latch is 

 connected. If square posts are used so state in order. 



