^J^in^'?"^^^-* -^^^*^'**-'*^'^'^ 



Suspended Milk Can Carrier — Fig. 767 



Specifications 



Operates on 0000 Basic Steel Wire Track. (See pages 187 to 190 for 



Track and Track Fittings.) 

 Capacity, five hand milk or cream cans. 

 Track Wheels are roller bearing. 

 Diameter of Track Wheels, 6 inches. 

 Clearance necessary for Track Wheels. 6 inches. 

 Total clearance necessary, loaded, 50 inches. 

 Shipping weight, 45)2 pounds. 



Fig. 767 is our Suspended Milk Can Carrier for carrying 

 five hand milk or cream cans. The hooks for attaching the 

 cans to the carrier go with the carrier. This carrier is also 

 fitted with the swivel wheels to run over curves and switches. 

 We can furnish this carrier with trucks to run on our solid steel 

 track when desired. 



767. (Harper) 

 Patented 

 Oct. 6, 1908 



■^atii 



n 



Fig. 



Railroad Milk Can Carrier for Wire 

 Track — Fig. 1046 



Specifications 



Operates on 0000 Basic Steel Wire Track. (See pages 187 to 190 for 



Track and Track Fittings.) 

 Capacity, three railroad milk cans. 

 Fitted regularly to raise and lower 3J^ feet. 

 Track Wheels are roller bearing. 

 Diameter of Track Wheels, 6 inches. 

 Clearance necessary for Track Wheels. 6 inches. 

 Total clearance necessary, loaded, 50 inches. 

 Length of hand chain, S'-i feet, ends joined together. 

 Shipping weight, 60 pounds. 



1046. (Pacific) 

 Patented 

 May 9, 1911 



This carrier operates on the same principle as the regular Railroad Milk Can Carrier, Fig. 1045. It 

 has a different gear, however, built to run on wire track. It will handle three railroad milk cans. 

 The cans can be raised and lowered for convenience at milking time, and for lifting in and out of 

 cooling tanks. This carrier is often used where the dairy building stands some distance from the cow 

 barn, wire track being stretched between the buildings. The track may also be continued to the inside 

 of the cow barn, and the cans kept in the place most convenient for the milkers. 



Louden Platform Hay Carrier — Fig. 809 



Specifications 



(See pages 



Operates on Louden Double Bead Steel Track, Fig. 57 

 175 to 183 for track and track fittings.) 



Platform made of wood, reinforced by 2x4 supports underneath. 



Length of platform, 72 inches: width, 30 inches. 



Track Wheels are roller bearing. 



Diameter of Track Wheels, 4 inches. 



Clearance necessary for track wheels, 5 inches. 



Total clearance necessary, 68 inches. 



Weight, 130 pounds. 



Fig. 809 shows a Platform Hay Carrier for conveying 

 either loose or baled hay into the feed alleys. The carrier 

 consists of a wood platform supported by means of a steel 

 bail or frame from the trolleys. On each side of the carrier 

 there is a special tubular shaft, into which are fitted steel 



teeth. These teeth can be folded down to lie flat on the platform, and the carrier may be used for 

 handling baled hay, milk cans, etc. When hauling hay the steel teeth are opened outward as shown 

 in the illustration. A very large bunch of loose hay may be handled with this carrier. 



Fig. 809. (Troy). 



Page One hundred (eventy-four 



