P^rt^ 9^t} n ijjciu h\¥ ; I iTran 



Steel Track, Track Hangers, Rafter Brackets, Etc. 



Louden tracks are made of the finest and strongest 

 high carbon steel and are especially adapted to 

 carrying heavy loads. The shape of Louden track 

 eliminates all unnecessary friction, and much less 

 power is necessary to operate a car than with the 

 ordinary, cheaply constructed track. A thin, flat 

 sided track will buckle over or become wavy, carrying 

 half the load that Louden track will carry with ease. 



Fig. 571. (Clara). 



No. 2. 



Fig. 832. iTrout). 

 Patented 

 Sept, 1. 1908 



Fig. 1066. 



Figure 571 is our Double Bead steel track. Number 2 is an end view. This track weighs 2 pounds 

 to the foot. Width of track 2 inches; height, 1 ^^ inches. 



Figure 832 is our link track hanger which we furnish in assorted odd 

 inch lengths up to 6! inches. Link track hangers at least 5 inches in 

 length should always be specified with Steel Track Litter Carriers. 

 Longer lengths may be specified where track passes under beams. 

 Five-inch length track hanger, weight per dozen, 73-2 pounds. 



Figure 1066 is our Adjustable Link Track Hanger. Handy for use 

 where joists are uneven. Weight (5-inch length) per dozen, Sj/^ pounds. 



In specifying Link Track Hangers for Steel Track Carriers to permit 

 track to pass under the girder or beams, the hanger should be 3 inches 

 longer than the thickness of the timber under which the track is to pass. 

 Example — For an 8-inch timber an I I -inch link hanger would be 

 neccessary. 



Figure 424 is our Standard Rafter Bracket. 

 This is the bracket to order for the litter carrier 

 track where the track is supported from joists or 

 beams running at right angles to the track. Weight 

 per dozen, 43^2 pounds. 



Figure 465 is our Ridge Pole Bracket which 

 is used when the track is hung parallel to a joist "^ 



or other 2-inch timber. Weight per dozen, 3 

 pounds. 



Figure 675 is our Side Rafter Bracket, used 

 where track is supported from sloping rafter 

 running at right angles to the track. Weight 

 per dozen, 53^ pounds. 



Figure 725 is our Side Beam Bracket for 

 hanging track to a timber running parallel with 

 the track. Weight per dozen, 6 pounds. 



465. (Cubeb). 



Fig. 424. (Casper). 



Fig. 725. (Beam). 



Fig. 675. (Cute). 



Fig> 523. Junior, (Cage). 



Figure 726 is a Screw Eye used for supporting 

 the track under ceilings, or this Screw Eye may 

 be substituted anywhere for the brackets 

 if preferred. Weight per dozen, 6 pounds. 



Figure 523 is an end stop block to clamp 

 on the end of track to prevent carrier from 

 running off the open rail. Weight, % pound. 



Fig. 726, (Eli). 



Page One hundred teventy-fiva 



