Plans for Installation 



Plan No. 1. 



We show here a few plans to illustrate some of the many ways in which Louden Carriers can be 

 made to meet any plan, no matter what the seeming difficulties. The plans mean nothing so far as size 

 and shape of buildings are concerned and the length and width are given that you may understand 

 how to figure the number of feet of track and the number of other fixtures required. 



Plan No. I shows a straight run of solid steel track extending from the rear of the building 30 feet 

 out in the yard. For this arrangement the following would be required: 



Figure Page 



70 ft. Double Bead Steel Track 571 173 



24 Link Track Hangers (3-inch length) 832 1 73 



14 Rafter Brackets 'B" 424 173 



10 Ridge Pole Brackets "M" 465 173 



1 Automatic Track Opener 859 1 82 



2 End Stop Blocks "ES" 523 173 



I Emancipator Litter Carrier 828 1 37 



In all of the plans where the Automatic Track Opener, Figure 

 Section, Figure 633, page 1 83, may be substituted if desired. 



859, is specified, the Removable 



Joists are usually 18 inches on center. We recommend a supporting hanger and bracket every other 

 joist or every 3 feet for the Double Bead steel. If the joists are 24 inches on center it would be well 

 to use a hanger on every joist, as four feet is rather too wide a space between hangers, especially if 

 the work is to be heavy. 



Page One hundred ninety-one 



