38 



Equipment of the Preparation Room and Workshop. 



No. 50242 



50246. 1:20. 



X 



50244. 1:17. 



50248. 1:15. 



50,242. Parallel jVice, turnable and detachable; width of jaws, 80 mm; distance between jaws. s. d. 

 90 mm; weight, 8 kg (M. T., p. 15) . 1. 7. 



o 



<t> 



Q 



<T> 

 "1 



3 

 g 



50.243. Small Anvil with Horn, for placing on work table (M. T., p. 15) 



50.244. Wall Rack for glass tubes and rods (F i g u r e), standing on small table, 2 m high 



50.245. Cupboard, 1 m wide, 90 cm high, 60 cm deep, with 6 shallow drawers for wires, ter- 



0.18. 

 2.15. 



3.10. 



minals, hose-piping, corks, etc 



50.246. Tool Cupboard withl Mechanic's Tools, Figure, with double doors, pannelled, 



with lock and key, stained and varnished, 1.2 m high, 0.9 m wide 8. 0. 



The following tools are hung up ready for use in the cupboard : A selection of files, consisting 

 of 4 hastard files 30, 25, 20 and 16 cm long; 3 smooth files 25, 20 and 16 cm long; 2 each round, 

 half-round, three-cornered and square files 16 and 12 cm long; 2 oval files 16 and 12 cm long; 1 hand 

 vice; 1 pair of flat pliers; 1 pair of round pliers; 1 pair of cutting nippers; spring callipers (1); spring bow 

 dividers (1); 2 hammers of different sizes; 1 soldering iron ; soft solder and acidfree solder; 1 pair metal 

 shears; 1 pair zinc jaws for the parallel vice; 1 fine whetstone; 1 try square; 6 screw drivers of various 

 sizes; 1 melting pot; 1 pair forge tongs; 2 pots, for wax, putty and sealing wax; 1 drill box with 

 bow and breast board; 1 spiral drill with 12 bits; 1 pair pipe tongs; 1 oilcan; 1 adjustable spanner; 

 3 bottles brass lacquer, yellow, black and green; 3 varnish brushes; 1 level; 1 metal saw frame; 6 metal 

 saw blades for brass; 6 do. for iron; 1 good die plate with taps; 1 set spiral bits; 12 sheets emery 

 paper. 



If a lathe is fitted up, the following are added to the tools: 4 hand steel tools; 4 slide rest tools; 

 1 spherical tool; and 1 tool for wood turning Extra price 0. 12. 



50.247. Tool Cupboard with Joiner's Tools, constructed same as above ' 4. 10. 



The cupboard contains the following tools: 2 saws, 1 frame saw with extra thin blade; 1 pad 

 saw; 3 planes; 3 chisels; 3 gouges; 3 wood try squares; 1 breast drill; 6 centre bits; 6 gimlets; 1 hammer; 

 1 pair pliers; 1 whetstone: 1 marking tool: 1 glue pot; 1 brush; 6 cramps; various sorts of screws 

 and nails; 200 grammes glue; 12 sheets sand paper; 1 turning tool and 1 spherical tool for wood 

 turning; 1 half-round and 1 flat wood rasp; 1 saw file; 1 tool for slant cuts. 



Cl. 53, 



3766, 5J. 



