No. 5<>253. 



Tools. 



39 



50249. 1:12. 







I 



50,247 a. Tool Cupboard with Mechanic's and Joiner's Tools, of pine, with double doors, 



with lock and key, stained and varnished outside, 1.05 m high; 0.75 m wide .... 



The following good quality tools are hung up in the cupboard: 8 metal files; 1 wood file; 1 wood rasp; 



I hand vice; 1 pair flat pliers; 1 pair round pliers; 1 pair cutting pliers; 1 metal saw with 3 metal 



__ . r . _ . i i -m 3t_ i : _ .^ i .1 _* 1 1 - i *V CL Hi* 



saw 

 1 



with , 



3 centre bits; 3 gimlets; 3 ripping chisels: 1 gouge: 1 oilstone; 1 glue pot. 



50.248. Wall Board with Mechanic's and Joiner's Tools, with 2 drawers (Figure) . . . 



The wall board contains 1 steel hammer: I wood hammer; 1 pair cutting pliers: 2 wire snips; 



II files; 1 metal saw; 1 key-hole saw; 3 screw drivers; 1 chisel: 1 pair shears; 1 melting ladle ; 1 glue 

 pan; 1 gimlet: 1 breast drill with 7 bits; 1 set cork piercers; 1 small vice: 1 cramp. 



50.249. Large Wall Board with Mechanic's and Joiner's Tools, Figure 



The wall board is made of pine, has two drawers and carries the following tools: 16 files for 

 metal and wood; 1 soldering iron, solder, flux; 2 screw drivers: 3 wood chisels; 1 hatchet; I breast 

 drill with 6 bits; 1 steel hammer: 1 plane; 1 breast drill with 4 bits: 4 wood cramps: 1 small parallel 

 vice for screwing on the table; 2 American cramps; 1 pair shears; 1 wooden hammer; 1 pair nippers; 

 1 reamer; 1 punch; 1 spanner: 1 large and one small hand vice; 1 pair each small and large nippers; 

 1 pair each small and large flat pliers; 1 pair each large and small round pliers: 2 gimlets; 1 cork 

 piercer: 1 knife: 1 pair scissors: 1 back square; 1 joiner's saw; 1 ruler; 1 tape measure; 1 box with 

 nails; 1 whetstone. 



50.250. 3 Wall Boards with drawer for tools, etc. (M. T., p. 15), without tools 



50.251. Tools for Metal Working (M. T., p. 15), for preceding wall boards 



9 flat files of different sizes and fineness; 2 half-round files; 2 triangular files; 3 round files; 



s. d. 

 5.10.0 



3.15.0 



7. 0.0 



drilling 



punch; 1 metal saw: 2 saw blades: 1 die plate with 2 taps; 1 die stock; 1 draw-plate; 3 screw-drivers; 

 1 universal spanner; 1 slip; 1 hone; 1 glazier's diamond: 1 each hard wood and lead block; 1 surface- 

 plate; 21 shanks, assorted. 



50.252. Tools for Woodworking, etc. (M. T., p. 16) 



1 saw -with narrow blade; 1 compass saw; 1 half-round rasp; 1 smoothing plane; sand paper, 

 1 breast drill with 12 centre bits and 12 augers; 4 gimlets; 3 ripping chisels; 3 gouges; 1 small hatchet ; 

 1 kitchen knife; 1 pair scissors. 



50.253. Measuring and Drawing Set (M. T., p. 16) 



1 metre ruler; 1 folding metre ruler; 1 tape measure; 1 vernier caliper with vernier; 1 screw 

 micrometer; 1 iron straightedge; 1 wood back square; 1 iron back square; 1 pair iron compasses; 

 1 set of drawing instruments; 1 drawing board; 1 T-square; 2 triangular set squares; 1 box of water- 

 colours with brushes; 1 small box with patterns, brush and colour; 1 set of number stamps; 1 writing 

 diamond. 



3. 10. 

 12.10.0 



1.15.0 



5.15.0 



Cl. 4164. 



