182 



SCIENCE OF SUCCESSFUL THRESHING. 



pins are removed before trying to swing the chute by means 

 of the hand-wheel for if left in, a broken reverse lever may 

 be the result. When a setting is nearly finished, the trip 

 pins should be removed so that the chute may be turned on 

 top of the machine as soon as the engine belt is thrown off. 

 The machine should never be moved until the chute rests in 

 its support* If it be not desired to Use the automatic move- 

 ment, the two-inch belt may be left off. 



FIG. 48. TELESCOPING DEVICE FOR STRAW-CHUTE. 



If the stacker drive belt does not run on the center of the 

 stacker pulley, it may.be made to do so by inserting a little 

 cardboard under the idler-pulley bracket. If the belt has 

 been running too far out (or away from the machine), on 

 the pulley, put the cardboard under the front part of the 

 bracket, and if the belt runs too far in on the pulley, put the 

 cardboard under the rear part of the bracket; Underlaying 



