LUBRICATION AND CARE OF THE SEPARATOR. IQQ 



and can be taken out at the left side of the machine by 

 simply loosening the set-screws in the vibrating-arms. The 

 rear rock-shaft is bent and is taken out by loosening the 

 set-screws and moving it to the right until it comes out of 

 the left-arm. It may then be removed by sliding it towards 

 the left side of the machine. 



To Remove the Straw-Rack. Take off the tailor-rack, 

 pan and rock-shaft, if these parts be on the machine. Take 

 off the four straw-rack boxes, the bolts of which can be 

 . easily reached with a socket-wrench through the holes for 

 vibrating-arms. The rack can then be taken out through 

 the rear of the machine. On separators fitted with wind- 

 stackers, it is necessary to remove the rear board. 



To Remove the Conveyor. If the straw-rack be already 

 out, simply unbolt the four boxes. The bolts of the front 

 ones have their nuts below and those of the rear ones can 

 be reached while sitting in the shoe. To remove the con- 

 veyoir without taking out the straw-rack, disconnect the 

 latter from the rear rock-shaft, raise it as high as possible 

 and secure it in this position. The conveyor can then be 

 taken out. 



To Remove the Shoe. The shoe can be taken out without 

 removing the straw-rack or conveyor. Take out the rear 

 rock-shaft, raise the straw-rack and conveyor as high as 

 the deck will allow and secure them in this position. Dis- 

 connect the four wood hangers and pitmans and the shoe 

 may then be taken out. 



