CLEVISES. 



53 



shaft D and link E, the slotted plate F, clamp 

 bolt C, and nut on the stirrup G for adjusting 

 the side draught, as herein set forth. 



88,619. LOUIS FLIEDNER, Cleveland, 

 Ohio. Elastic Links for Clevises. Apr. 6, 

 1869. 



Claim. The spring D, as arranged in com- 

 bination with the adjustable cross-bar E, yoke 

 or frame C, and hook F, in the manner sub- 

 stantially as and for the purpose set forth. 



89,407. G. W. HOLTON, Berlin, Ky. 



Clevises. Apr. 27, 1869. 



Claim. Clevises, having the extended front- 

 bar provided with the hitching-rings D, and 

 braced, all substantially as specified. 



90,068. JOHN ADOLPH BILZ, Pleas- 

 anton, Cal. Plow-Clevises. May 18, 1869. 

 Claim. 1. The vertical slotted bar E, se- 

 cured to the ends of the two arms A and B of 

 a clevis, substantially as and for the purpose 

 described. 



2. The sliding-bar F, moving up and down 

 through slots in said arms A and B, and held 

 at the point desired by means of a set-screw, 

 g, substantially as and for the purpose de- 

 scribed. 



3. The shackle G, attached by a swivel- 

 joint to the screw c, said screw being secured 

 to the lower end of the sliding-bar F, and 

 moving up and down in the vertical slot a, sub- 

 stantially as and for the purpose described. 



90,736. ELIAS EVANS, Montgomery, 



Ala. Clevises. June 1, 1869. 



Claim. The clevis herein described, con- 

 sisting of the shank S and curved body A, 

 having the holes a a, D, together with the 

 bolts C C and nuts c, when adapted to be em- 

 ployed in connection with a plow-beam having 

 the gain b, substantially as and for the purposes 

 set forth. 



92,409. GEORGE WATT, Richmond, 



Va. Clevises. July 6, 1869. 



Claim. 1. The block M, provided with 

 vertical pivots O O, and a vertical series of 

 perforations N N, substantially as described, 

 for the purposes set forth. 



2. In combination with the clevis L M, con- 

 structed substantially as described, the plates 

 G G, bolts H H', and whiffletree-loop P, con- 

 structed and arranged to operate substantially 

 as and for the purpose specified. 



3. In combination with the clevis L M, con- 

 structed substantially as described, whiffletree- 

 loop P, bolts H H', and coupling G G', the 

 bolt I, and washers K, substantially as and for 

 the purpose set forth. 



92,775. JAMES L. BALDWIN, Troy, 

 Pa. Plow Clevises. July 20, 1869. 

 Claim. The combination of a rubber block, 

 B, or equivalent, with the mortised forward 

 part of the plow-beam, to sustain the draught 

 of the clevis-pin or bolt, substantially as here- 



in shown and described, and for the purpose 

 set forth. 



92,806. PHILIP FALKER, Lanesville, 



Ind. Plows. July 20, 1869. 



Claim. 1. The arrangement of the clevis 

 E, bar D, and box F, which is regulated to 

 slide freely over the clevis, and is controlled 

 by the screw G, as specified. 



2. In combination with the box F, clevis E, 

 and bar D, the bar C, when connected to a 

 loop, which passes from the under side of the 

 beam over the top thereof, and passes back 

 down through the beam and connected to the 

 upright, as shown and described. 



92,953. SAMUEL H. FREDERICK, 



Matteson, Mich. Clevises. July 27, 1869. 



Claim. The hook marked 1, slotted at one 

 end, to receive the hook 2 and hook 3, slotted 

 at the rear end, to receive the upper end of 

 hook 2, in combination with hook 2, all con- 

 structed and arranged as described and shown. 



93,396. WILLIAM W. ATTEBERRY, 



Chesterfield, 111. Clevises. Aug. 10, 1869. 



Claim. An improved plow-clevis, formed 

 by the combination of the main clevis A, 

 adjusting-gauge D, double tree clevis G, having 

 a hook, K, formed upon the forward end of 

 its upper arm, and connecting-clevis H, with 

 each other, said parts being constructed and 

 arranged substantially as herein shown and de- 

 scribed, and for the purpose set forth. 



84,296. THOMAS DOW, Yorktown, 

 111. Plow Clevises* Aug. 31, 1869. 

 Claim. The concave plate A, provided 

 with holes X, and lugs C and D, in combina- 

 tion with the two-part roller G G, clevis J J, 

 provided with shank L P flange N, and spring- 

 bolt T, constructed and arranged to operate as 

 and for the purpose set forth. 



94,348. ZACHARIAH B. SIMS, Bon- 

 ham, Texas. Clevises. Aug. 31, 1869. 

 Claim. The clevis D, and screw eye-bolt 



B, combined to operate together as described. 



87,680. MARTIN PRILL AMAN, Tip- 

 ton, Ind., assignor to himself and Elizabeth 

 Ressler, same place. Draught-Regulators for 

 Plows. Dec. 7, 1869. 



Claim. Plate a, plates b and c, screws, and 

 lever-bar f, in combination with the half-circle 

 u, plate 0, lever i, catch k, spring m, and 

 draught-rod/, substantially as herein set forth, 

 and for the purposes specified. 



97,990. JEREMIAH H. TARPLEY, 



Greensborough, N. C. Clevises for Plows. 



Dec. 14, 1869. 



Claim. 1. The curved plate D, when pro- 

 vided with a socket B, and with one or more 

 notched ribs E on its face, substantially as and 

 for the purposes set forth. 



2. In combination with the plate, socket, 

 and ribs, above claimed, the clevis-strap F, 

 substantially as described. 



