PLOWS. 



337 



5. The false share for securing the removable 

 cutter share and point in place as described. 



6. The combination of the reversible cutter, 

 revesible share and adjustable extension point 

 with the false share and mold board, in the 

 manner and for the purpose substantially as 

 described. 



68,550. E. L. BERGSTRESSER, Hub- 

 lersburg, Pa. Plows. Sep. 3, 1867. 



Claim. 1 . The slotted plate or plates where- 

 by the angle of presentation of the plow, both 

 vertical and horizontal, is adjusted, in the 

 manner described. 



2. The block standard or plate to which the 

 handles are connected adapted to fit and to be 

 adjusted upon the adjacent face of the plate or 

 angle iron attached to the plow beams, substan- 

 tially as described. 



3. The angle iron constructed as described, 

 or its exuivalent provided with the vertical and 

 horizontal slots and adapted to be used in con- 

 nection with the plow beams and handles or 

 handle blocks, substantially as and for the pur- 

 pose set forth. 



69,555. FERDINAND FELDHANS, 



Baltimore, Md. Plows. Oct. 8, 1867. 



Claim. 1. The construction, combination, 

 and arrangement of the board shank a, and 

 movable mold-board c, as shown. 



2. The segmental clevis d, either horizontally 

 or vertically arranged as described. 



3. The flanged share S, as constructed and 

 applied. 



69,643. J. G. DODGE, Louisville, Ky. 



Plows. Oct. 8, 1867. 



Claim. 1. The frame, constructed as shown 

 and described. 



2. The share P, having the flange T, ar- 

 ranged to fit in the recess at the front of the 

 frame and form a section of the landside, as 

 set forth. 



3. The plate N, arranged to fit in the space 

 under the bar/, and in connection therewith 

 form the rear portion of the landside, as shewn 

 and described. 



4. Forming the landside of a plow of station- 

 ary section b and the removable sections T 

 and N, when constructed and arranged as 

 described. 



5. Securing the plate N to the frame by 

 means of the notch u and the flange a, as set 

 forth. 



6. Securing the flange T in place by means 

 of the point fitting into the notch d on the 

 front edge of the section b, substantially as de- 

 scribed. 



69,834. L. E. PALMER, Le Ray, Pa. 

 . Plow Wheels. Oct. 15, 1867. 



Claim. The construction and arrangement 

 of the wheel A, shaft B, and braces DUD, 

 and irons E E, in connection with the wheel 

 C, which supports the front of the beam, as 

 shown and described. 



69,867. JAMES VANDEGRIFT, 



Princeton, 111. Plows. Oct. 15, 1867. 



Claim. The combination with the beam d 

 of the flange £' or its described equivalent, the 

 brace e, army, adjustable collar k and screw m, 

 constructed and arranged in the manner herein 

 shown and described, and employed to adapt 

 the plow for either light or heavy draft, in the 

 manner set forth. 



4,119. JAMES VANDEGRIFT, Prince- 

 ton, 111. Plows. Patent No. 69,867, dated 

 Oct. 15, 1867. Reissued Sep. 13, 1870. 

 Claim. 1. The within - described arrange- 

 ment of the beam d, the plow g, and landside 

 h, arm J, sleeve k, and screw-bolt m, operating 

 in the manner and for the purpose herein de- 

 scribed. 



2. The construction and arrangement of the 

 plow-post £-with its backward-projecting flanges 

 g', when attached to the plow, as herein shown, 

 so as to admit of the adjustment thereto of a 

 plow-beam, in the manner and for the purpose 

 herein described. 



69,943. GEORGE SPIEHLMAN, 



Strasburg, Pa. Plows. Oct. 15, 1867. 



Claim. 1. The construction of the flattened 

 and enlarged head b, with its curved slot of the 

 standard B, in combination with the applica- 

 tion and arrangement of the hinge pieces M N 

 forming the joint J of the beam and handles, 

 when all made in the manner and for the pur- 

 pose specified. 



21 The slotted wedge K, in combination 

 with the flanged and sunken tail piece of the 

 point E, constructed in the manner and for the 

 purpose set forth. 



3. The mode of constructing and applying 

 the sole piece G by ears and bolts to the base 

 of the landside, arranged as shown for the pur- 

 pose specified. 



4. The extra heel piece I, in combination 

 with the mold-board D, when made and ar- 

 ranged in the manner set forth. 



5. The combination and arrangement of the 

 hinged beam A with the handle C, the sole 

 piece G, heel I, wedge K, flanged point E, 

 and mold board D, when all are made and ar- 

 ranged in the manner shown, for the purpose 

 specified. 



69,999. J. E. JINKINS, Milton, Fla. 



PIOWS. Oct. 22, 1867. 



Claim. 1. The adjustable share C, applied 

 to the front bar a of the frame a of the plow, 

 substantially as and for the purpose specified. 



2. The adjustable side cutter or scraper D, 

 in combination with the adjustable share C, 

 and frame A, all arranged to operate in the 

 manner substantially as and for the purpose 

 specified. 



70,159. GEORGE T. BREWER, 



Prairie du Rocher, 111. Plows. Oct. 29, 

 1867. Antedated Oct. 18, 1867. 

 The plows are arranged in diagonal order, 

 the front and rear plow beams branching from 



