AU 



PLOWS. 



the plow-standard, and securing them at any 

 desired angle with the beam, by clamping the 

 corrugated irons against a corrugated segment 

 on the plow-standard, by a clamping-bolt 

 placed above the pivot-bolt, and passing through 

 holes in the handles and a slot in the plow- 

 standard, substantially as is herein specified. 



93,430. J. W. GILLIAM, Elkton, Ky. 



Plows. Aug. 10, 1869. 



Claim. 1. The improved plow -supporting 

 frame, constructed and arranged for adjusting 

 the plows, substantially as specified. 



2. The combination, with the said plow- 

 supporting frame, of the plows E, provided 

 with the branched shanks and hinged braces, 

 substantially as specified. 



94.366. EDWARD WIARD, Louis- 

 ville, Ky., assignor to B. F. Avery, same 

 place. Plows. Aug. 31, 1869. 



Claim. 1. The adjustable exchangeable seats 



D, constructed and arranged substantially as 

 herein shown and described, in combination 

 with the standard C and with the plow-plates 



E, F, G, H, or either of them, as and for the 

 purpose set forth. 



2. The combination of the circular adjust- 

 able cutter I, with the skeleton standard-frame 



C, when used in connection with the seats D 

 and plow-plates E, F, G, H, or either of them, 

 substantially as herein shown and described, 

 and for the purpose set forth. 



94.367. EDWARD WIARD, Louis- 

 ville, Ky., assignor to B. F. Avery, same 

 place. Plows. Aug. 31, 1869. 



Claim. 1. The cast standard-skeleton D, 

 constructed substantially in the manner herein 

 shown and described, and for the purposes set 

 forth. 



2. The point F and arm/', constructed and 

 attached to the skeleton D, substantially in the 

 manner herein shown and described. 



3. The brace-bar G, constructed with lugs 

 g 1 g' 2 , and secured to the mold-board E and 

 landside of the skeleton D, substantially in the 

 manner herein shown and described, and for 

 the purpose set forth. 



94.636. O. OSBORN, Trumansburg, N. 

 Y. Plows. Sep. 7, 1869. 



Claim. 1. The rack-bar G, in combination 

 with the slotted guide B and cam H, when used 

 to raise and lower the plow, substantially as 

 set forth and described. 

 ' 2. The spring M, when used to hold the bar 

 G down, substantially as shown. 



3. The plow D, rack-bar G, guide B, cam 

 H, handle K, stop L, and spring M, when used 

 and combined substantially as set forth. 



94.637. WASHINGTON F. PAGETT, 



Springfield, Ohio. Plows. Sep. 7, 1869. 

 Claim. 1. The manner of attaching the 

 mold-board to the beam, by means of the plate 



D, substantially as shown and described. 



2. The combined bolt, key, washer, and tap 

 or nut, in all applications of the device, sub- 



stantially the same as the present, not only as 

 a means of bringing and holding the parts to- 

 gether firmly, but as a provision against lateral 

 strains, the head of the bolt on one side, and 

 the washer on the other, overlapping the joint 

 or point of contact of the parts, substantially 

 as described. 



3. The scroll or internal spiral recess washer, 

 in any or all different combinations, and in all 

 cases where it may be used individually. 



94,667. MOSES TESSIER, Cairo, 111. 



Plows. Sep. 7, 1869. 



Claim. 1. Securing the frame A to the beam 

 B by means of the lugs a 1 a 2 , bolts C D, clevis 

 and bar E F, and slotted wedge G, substan- 

 tially as herein shown and described, and for 

 the purpose set forth. 



2. The double and double-pointed mold- 

 board I, constructed substantially as herein 

 shown and described, and secured in place by 

 means of the pointed forward end of the frame 

 A and arm K, to which it is bolted, as and for 

 purpose set forth. 



94,841. NATHANIEL ROBINSON, 



Patchogue, N. Y. Plows. Sep. 14, 1869. 



Claim. 1. The arrangement of the double- 

 beam G G' and colter I, substantially as and 

 for the purposes specified. 



2. In connection with the double-beam G G', 

 cross-bar E, and plow ABC, the vertical 

 screw-standard H, and adjusting nuts m m' , 

 constructed to operate substantially as and for 

 the purposes specified. 



95,163. ABEL TEAGUE, Madisonville, 

 Ky Plows. Sep. 21, 1869. Antedated 

 Sep. 10, 1869. 



Claim. 1. The metallic standard F, con- 

 structed substantially as and for the purpose 

 described. 



2. The bar, or sole D, constructed substan- 

 tially as and for the purpose described. 



3. The bar, or sole-brace E, when used in 

 combination with the bar, or sole D. con- 

 structed substantially as described. 



4. The metallic frame-work of a plow, com- 

 posed of the standard F, and the bar, or sole 

 D, when cast in one single piece, constructed 

 substantially as described. 



95,251 J. 0. McNUTT and A. B. FUR- 

 MAN, Strattonville, Pa. Plows. Sep. 28, 

 1869. 



Claim. Forming a groove, (f , in the part of 

 the mold-board that is covered with the plow- 

 point, substantially as herein shown and de- 

 scribed, and for the purpose set forth. 



7,732. JAS. 0. McNUTT, Blairsville, and 

 ALONZOB. FURMAN, Strattonville, 

 Pa., assignors by mesne assignments to Jas. 

 Oliver. Plows. Patent No. 95,251, dated 

 Sep. 28, 1869. Reissued June 12, 1877. 

 Filed Dec 4, 1876. 

 Claim. 1. A colter and plow-point made in 



one piece, the same having a curve like or 



