384 



PLOWS. 



B 2 , cast with and forming an integral part of 

 the mold-board B, said mold-board being pro- 

 vided with a seat for the point C, landside F, 

 and special shoe D, and with a reverse face 

 having an ear B 3 , and a pad B 4 , forming ful- 

 crum-points for the handles J J', substantially 

 as shown, and for the purpose set forth. 



2. The combination, with the double-stand- 

 ard mold -board B B' B 2 , of the straight jointer- 

 bar G, secured by bolts g g' to the stands B' 

 B 2 , said bar being further provided with a lug 

 b 3 , adapted to engage a recess b*, in the stand- 

 ard B', substantially as shown, and for the pur- 

 pose specified. 



3. The straight jointer-bar G, provided with 

 jointer-head G', in combination with the double- 

 standard mold-board B B' B 2 , said jointer-bar 

 being attached to the standards B' B 2 by bolts 

 g g 1 , lug b 3 , and recess b*, substantially as shown , 

 and for the purpose described. 



4. The caster-wheel pedestal Q, having a 

 vertical guide-recess Q 3 , oblong bolt-slot q, ful- 

 crum-foot Q', and adjustable foot Q 2 , provided 

 with circumferential slot R, in combination 

 with the bram A, bolt R', clevis A 3 , bolt a', 

 caster-wheel M, and sliding head P, having 

 bolt F, and shaft O, substantially as shown, 

 and for the purpose herein set forth. 



254,634. JOSEPH GEORGE, Fayette- 



ville, Ark. Plows. Mar. 7, 1882. Filed 



Aug. 3, 1881. 



Claim. 1. The combination, with the share 

 a and share-bar b, made in one piece, and 

 mold-board k, of the landside c, having the 

 wing //, and a plow standard secured to the 

 share-bar and landside, and abutting against 

 the wing h, substantially as des ribed. 



2. The combination of the share a and share 

 bar b, made in one piece, mold-board k, land- 

 side c, provided with the wing h, and boss w, 

 having a central hole, standard u, provided 

 with a circular recess x, having a central hole, 

 and beam /, substantially as described, and for 

 the purpose set forth. 



254,734. JAMES VANDEGRIFT, 



Princeton, 111. Plows. Mar. 7, 1882. Filed 



Dec. 24, 1881. 



Claim. In a plow, the combination of the 

 bearing-frame a bf, substantially as described, 

 with the wheels c, d, and e, mounted and ar- 

 ranged substantially as described, and for the 

 purpose set forth. 



255,370. GEORGE WIARD, Batavia, 

 N. Y., assignor to the Wiard Plow Company, 

 same place. Plows. Mar. 21, 1882. Filed 

 Aug. 24, 1881. 



Claim. 1. The combination, with a plow- 

 beam, of a caster-wheel journaled in a bearing 

 G, provided with one or more stops, h, a pivot 

 bolt g, a sleeve, H, surrounding the bolt g and 

 secured to the beam, and one or more recesses 

 ti , formed in the sleeve H, substantially as set 

 forth. 



2. The combination, with a standard, C, 

 constructed with a lateral bend or offset, m, 



whereby the rear portion of the standard is lo- 

 cated nearer the mold-board than its front por- 

 tion, of a beam, E, secured to the standard in 

 front of the bend m, and handles N, secured to 

 the standard in the rear of the bend m, sub- 

 stantially as set forth. 



255,898. AUGUSTUS 0. TAYLOR, 



San Francisco, Cal. VineYard-Plows. Apr. 



4, 1882. Filed Dec. 19, 1881. 



Claim. The movable portion G of the mold- 

 board, mounted on a vertical pivot and moving 

 in a horizontal arc, in combination with the 

 lower fixed portion, F, and brace I, all con- 

 structed, arranged, and operated as set forth. 



256,750. FREMONT SIMONDS, Grand 



Island, N. Y. Plows. Apr. 18, 1882. Filed 



June 1, 1881. 



Claim. 1. A mold-board provided with an 

 inwardly-extending flange, b, at the lower edge, 

 in combination with a shoe, a', secured detach- 

 ably to the under side of said flange, to extend 

 below the lower edge of the mold-board, as and 

 for the purpose set forth. 



2. A plow having a mold-board and land- 

 side, in combination with the handles pivoted 

 one to the mold-board and the other to the 

 landside, and with angle-plates I and an inter- 

 mediate plate L, bolted to both handles, asset 

 forth. 



257,241. MILTON ROSS, San Jose, Cal. 



Plows. May 2, 1882. Filed Aug. 5, 1881. 



Claim. 1. The plow-beam A, with its slot- 

 ted arm B, in combination with the crank G, 

 standards F and K, landside C, beam adjusting 

 plate I, and handle adjusting plate J, secured 

 thereto, substantially as herein set forth. 



2. The mold-board D, with its extension d, 

 in combination with the slotted plates I and J 

 and plow beam A, with its slotted arm B, said 

 beam being adapted to shift upon the crank G, 

 substantially as herein described. 



3. The mold-board D, with its extension d, 

 in combination with the slotted plates J and 

 handle-stem M, pivoted to the cross brace E 

 and adapted to travel on the slotted plate J, sub- 

 stantially as described. 



258,115. ADDISON P.PUREPOY, 

 Wake Forest, N. C. Plows. May 16, 1882. 

 Filed Dec. 5, 1881. 



Claim. 1. A plow beam composed of a 

 metal plate bent at its lower edge to form a 

 flange, and provided with the angular slot a* 

 and arc G, substantially as described. 



2. The combination of a plow beam, a stand- 

 ard attached to said beam by a pivot-bolt and 

 clamp, as represented by E F, a toothed seg- 

 ment, H, fastened to said standard, and a stop- 

 piece, I, for engaging the teeth of said seg- 

 ment, substantially as described. 



3. The combination, with the plow beam and 

 standard pivoted thereto, of a toothed segment 

 fastened to said standard and a separate stop- 

 piece, I, adapted both to engage the teeth on 

 said segment and to damp the segment npainst 



