SHOVEL. 



;>o< 



208,664. VAN R. DAVES, Buchanan, 

 assignor of two-thirds his right to A. West- 

 brooks, J. C. Westbrooks, and W. A. West- 

 brooks, Rock Mart, Ga. Plow Stocks. Oct. 

 i, 1878. Filed Aug. 16, 1878. 

 Claim. In a plow, the shank A, formed 

 from a single piece, and having the oblong 

 opening d, and forked or separated, po as to 

 encompass the extreme rear end of the beam 

 D, and rigidly secured thereto, then continu- 

 ing above said beam on each side and rigidly 

 secured to the. brace E, in combination with 

 the brace F, beam D, and handles K, all con- 

 structed and operating substantially as and for 

 the purpose set forth. 



209,043. ABRAM HEARTSILL, 



Louisville, Tenn. Shovel Plows and Harrow 



Attachments. Oct. 15, 1878. Filed July 10, 



1878. 



Claim. 1. The colter E, provided with the 

 top and bottom screw-rods, e e', in combina- 

 tion with the shovel D, beam A, and standard 

 C, the rear end of the beam being hinged to 

 the standard, and adjusted by nuts on the up- 

 per screw rod, e, substantially as and for the 

 purposes herein set forth. 



2. The vertically-adjustable harrow attach- 

 ment G, connected to the side of the plow- 

 beam, and operated by the lever H to a suit- 

 able angle with respect to the beam, as set 

 forth. 



209,282. THOMAS F. McNAIR, 



# Worthville, Ga. Plows. Oct. 22, 1878. 



' Filed Aug. 15, 1878. 

 Claim. The combination of the double me- 

 tallic standard C, pivoted to each side of the 

 plow-beam, the shovel E, the cutter F, having 

 pin /', and the adjustable slotted brace D, the 

 shovel, the cutter, and the brace being con- 

 nected to the standard by the same bolts, sub- 

 stantially as herein set forth. 



210,176. GEORGE W. WIGGINS, 



Cuthbert, Ga. Plows. Nov. 19, 1878. 



Filed Apr. 10, 1878. 



Claim. 1. The combination, with the slot- 

 ted standard E E' and blade or point F, of the 

 slotted washer n, having an obtuse-angled 

 shank, /, provided with cross-piece, m, bearing 

 upon the upper edge of the blade or point F, 

 and headed screw-bolt o, having nut q, sub- 

 stantially as and for the purpose specified. 



2. The combination, with the beam A, of 

 the handles C C, supported at their rear ends 

 upon said beam by the pivoted braces B B, 

 and connected at their forward convergent 

 ends to said beam by the keeper or yoke d, 

 secured to the slide or frame D, keyed to the 

 beam by the key or wedge e, substantially as 

 shown and described, and for the purpose set 

 forth. 



3. The combination, with the beam A, hav- 

 ing a number of apertures, c d ', of the bifurcat- 

 ed U-shaped standard E E, having a fixed per- 

 forated arm, E', substantially as and for the 

 purpose set forth. 



211,002. WOODSON DICKERSON 

 and WILLIAM H. STRAIN, Summer- 

 ville, Ga. , assignors of one-fourth their right 

 to John Taylor, same place. Plows. Dec. 

 17, 1878. Filed Oct. 19, 1878. 

 Claim. In a plow, the combination of the 

 perforated bifurcated stock B, having the solid 

 point B' and slotted extensions b c c, secured 

 directly to the handles, with the beam A and 

 the pivoted perforated beam-brace D, substan- 

 tially as set forth. 



211,433. REUBEN J. TALLEY, Har- 



risville, Tex. Grub-Plows and Stalk-Cutters. 



Jan. 14, 1879. Filed Nov. 12,1878. 



The colter serves, with the broad cutter, to 

 prevent the plow from being driven laterally as 

 it encounters grubs or roots. 



Claim. In a grub-plow, the saw C, in com- 

 bination with the cutter B and colter D, sub- 

 stantially as shown and described. 



211,632. ANDREW L. M A N N I N G, 

 Booneville, Miss. Plows, Jan. 28, 1879. 

 Filed May 14, 1878. 



Claim. In a cotton-sweep, the combination, 

 with a front detachable share adapted to be 

 vertically adjusted, of side wings, respectively 

 made in single piece and formed with diagonal 

 stems, which latter fit against horizontal bar 

 connecting the standard and rear stock of the 

 plow, said stems being provided with holes in 

 their rear portions and oblong slots forward of 

 the same, whereby a single pivot and bolt ad- 

 just the wings in a vertically-inclined plane, 

 substantially as set forth. 



213,225. GEORGE W. McDANIEL, 



Conyers, Ga. Plows. Mar. n, 1879. Filed 



Dec. 5, 1878. 



Claim. 1. In a plow, the combinaton, with 

 a side beam, of the two bars composing the 

 standard, the outer one thereof being formed 

 with a stem, which passes through the plow- 

 beam, and side beam, the same being adapted 

 to secure the rear end of said side beam, to- 

 gether with the upper end of said standard, to 

 the plow-beam, substantially as set forth. 



2. In a plow, the combination, with a plow- 

 beam, of the two bars constituting the standard, 

 one of said bars being formed with a horizontal 

 stem, which passes through a corresponding 

 hole in the plow-beam, and is of length adapt- 

 ed, by engagement of a nut on its screw-thread- 

 ed extremity, to adjust said standard laterally 

 to or from the plow-beam, substantially as set 

 forth. 



218,558. ASA NEWSOM, Valdosta, Ga. 



Plows. Aug. 12, 1879. Filed May 26, 1879. 



Claim. The combination of the curved slot- 

 ted standard A, the plow-beam C, secured be- 

 tween its upper ends, and provided with an ex- 

 tension having eye c 1 and tooth c 3 , the toothed 

 bar D, and brace-bars E, connecting the stand- 

 ard and handles, as shown and described. 



