584 



SIDE-HILL. 



126,865. BENJAMIN F. BAKER, 

 Ballston Spa, N. Y. Plows. May 21, 1872. 



Claim. 1. A plow having the mold-board 

 hinged to the side of the standard or landside, 

 so that it can be tipped backward and forward, 

 in the manner and for the purpose substantially 

 as set forth. 



2. The doubled-pointed reversible mold- 

 board D, constructed and operated in the man- 

 ner substantially as and for the purpose set 

 forth. 



3. The movable brace E, or its equivalent, 

 for supporting the hinged mold -board, in man- 

 ner substantially as set forth. 



4. The combination of the landside or stand- 

 ard A, hinged mold-board D, and knuckle- 

 jointed braces E, when constructed as described, 

 and operated in the manner and for the pur- 

 poses substantially as set forth. 



5. The pivot-disks H I and adjusting-plates 

 K, operating in combination with the locking- 

 bolt L, or equivalent device for the purpose of 

 adjusting and securing the plow-beam, in the 

 manner substantially as set forth. 



126,952. JOHN S. HALL, Pittsburg, 

 Pa. Plows. May 21, 1872. 



Claim. 1. The point A, angular base B, 

 standard and brace C D, and V-shaped or dou 

 ble mold-board G, constructed and arranged, 

 in connection with each other, substantially as 

 herein shown and described, and for the pur- 

 pose set forth. 



2. The flange or plate Fand bar I, construct- 

 ed and arranged, in connection with the an- 

 gular base B, V-shaped or double mold-board 

 G, and brace D d' ', substantially as herein 

 shown and described, and for the purpose set 

 forth. 



3. The weighted lever-latches J, in combin- 

 ation with the bar I, and shoulder d' formed 

 upon the brace-bar D, substantially as herein 

 shown and described, and for the purpose set 

 forth. 



127,372. AUGUSTUS SANDBORN, 



St. Johnsbury, Vt. Plows. May 28, 1872. 



Claim. The combination of the wedge-shap- 

 ed foot b with the share and cutter, as and for 

 the purpose described. 



129,054. FRANCIS POINDEXTER, 



Franklin, N. C. Plows. July 16, 1872. 



A cross standard to which reversible mold- 

 boards are attached, the standard being pivot- 

 ed to the rear of the plow-beam by a single 

 pivot, allowing it to swing so that either the 

 right or left hand mold-board can be used. 



Claim. The intersecting plow-standards F, 

 in combination with the pivoting-bolt E and 

 rear end of the plow-beam A, substantially as 

 herein shown and described, and for the pur- 

 pose set forth. 



130,882. HENRY H. SWEETLAND, 



Centreton, Ohio. Plows. Aug. 27, 1872. 

 Claim. 1. The combination of the reversi- 



ble plow A, beam M, and the operating mech- 

 anism, substantially as described. 



2. The beam B, disks G, lock D, and lever 

 J, when combined to form a lock for holding 

 the plows in position, substantially asset forth. 



3. The beam M extending forward over the 

 axles and under the tongue, in combination 

 with the draft-rod P and adjusting-rod 0, sub- 

 stantially as specified. 



4. The axles B, lever J, disks G, beam M, 

 lock D, and reversible plow A, when all are 

 combined as set forth. 



131,679. HENRY B. HAKES, Wor- 

 cester, Mass. Plows. Sep. 24, 1872. 



Claim. 1. The combination, with the beam, 

 mold-board, and point, in a swivel-plow, of a 

 bed C, tapered from front to rear, substan- 

 tially as and for the purposes set forth. 



2. The mold-board D having the forward 

 convexity at/, the rapidly-receding curved sides 

 hh hollowed out at i, and the outwardly-curved 

 flukes k k, substantially as shown and described, 

 and for the purpose set forth. 



133,517. THOMAS J. BURGESS, 



Kingston, N. Y. Plows. Dec. 3, 1872 



Claim. The arrangement of the reversible 

 bar C, the loop E, the rod F, and the stud c 

 provided on the handle G, all arranged with 

 reference to each other and to the beam B, sub- 

 stantially as and for the purpose specified. 



133,631. WILLIAM H. CONAWAY, 



Dillsborough, Ind. Plows. Dec. 3, 1872. 



Claim. The extension-wings a a', hinged 

 directly to the mold-boards of the shares A A', 

 and supported by the combined rest and brace 

 c and stop K, constructed and arranged sub- 

 stantially as described, for the purpose set forth. 



141,222. GEORGE W. HOWE, Vine- 

 land, N. J. Reversible Plows. July 29, 1873. 



Filed Apr. 17, 1873. 



Claim. The pivoted double-edged colter, 

 provided with drum, chain, and slide -bar, 

 working by lever, substantially as and for the 

 purpose described. 



144,308. AUGUST ANSCHUTZ, 

 ANTON SEIDEL, and MICHAEL 

 WEBER, Livingston County Mo. Plows. 

 Nov. 4, 1873. Filed July 21, 1873. 



Claim. 1. The foot F, provided with the 

 fender R and shield H, for the uses and pur- 

 poses specified. 



2. The foot F, provided with the fender R 

 and socket or journal F', in combination with 

 revolving standard I, lever L, and ratchet E, 

 substantially as shown and described. 



144,760. JOHN S. HALL, Pittsburg, Pa. 



Plows. Nov. 18, 1873. Filed June 20, 1873. 



Claim. The branches A 1 A 2 of the beam 

 and the sole F, constructed and combined with 

 the nut-screw and slotted wedge in the manner 

 and for the purpose specified. 



