THE IKKIGATION AGE. 



235 



This splendid 70 gallon verti- 

 cal suction, centrifugal Buffalo 

 Pump for only 



Larger Sizes in 

 Propc rtion 



"Buffalo" Vertical Suction 

 Centrifugal Pump the highest 

 pump value ever offered at the price 



We are prepared to make stock ship- 

 ments from factory of this highly 

 recommended and exceedingly popular 

 irrigation pump, used for heads not 

 exceeding over 50 feet. It belongs to 

 the trade-marked "Buffalo" Class M 

 family, which has won just recognition 

 as the highest value obtainable in 

 popular priced centrifugal pumps. 

 The outfit includes pump, pulley, com- 

 panion flanges and coupling for both 

 suction and discharge, as shown. Only 

 the finest white babbitt metal is used 

 in the extra long bearings, which are 

 furnished with brass compression 

 grease cups. Thrust bearing is of ball 

 bearing type. It may be installed by 

 attaching the suction flange directly 

 to the well casing, the pump itself be- 

 ing set between two vertical timbers, 

 which also carry the shafting, bearings, 

 etc., and is driven by pulley located 

 above the ground at top of the well. 

 Bearings, shaft collars, and steel shaft- 

 ing can be supplied at a slight extra 

 cost to suit your individual require- 

 ments. Being accurately made and 

 fitted, all parts of the pump are inter- 

 changeable and can be promptly dup- 

 licated at any time. Couplings are 

 bored same size as shaft and bearings. 

 Larger sizes also made. The price 

 quoted is f. o. b. our factory. 



Send us your order now. 



Ask for Catalog No. 23J-C. 



BUFFALO STEAM PUMP CO. 



Buffalo, N. Y. 



Agents Wanted for our complete line of 

 pumps for every purpose 



SAMSON TURBINE 



When the PUMP cannot be direct connected to 

 the turbine shaft, the power is usually trans- 

 mitted by gears, shafting, etc. On account of 

 the HIGH SPEED of the SAMSON, for a given 

 power, lighter and consequently CHEAPER 

 transmission machinery can be used. 



JAMES LEFFEL & CO, 



Springfield, Ohio, U. S. A. 



316 Lagonda Street 



IRRIGATION DITCHES 



Cheaply and Properly Made with a 



Rural Road Grader and Ditcher 



Cutting V-Bottom ditch on Slope of V/i to 1. 



The successful irrigation ditch or lateral must be cut 

 clean, with slopes smooth and undisturbed. This ma- 

 chine was especially designed to meet these requirements. 

 One horse and wheel traveling in point of ditch, the 

 other outside the bank of earth. Operated by one or 

 two men and two or four horses. 



If you have an irrigation problem to solve, do not fail 

 to write for full information concerning this Combined 

 Grader and Irrigation Ditcher. 



Address 



C. D. EDWARDS, Albert Lea, Minn. 



When writing to advertisers please mention The Irrigation Age. 



