SOMETHING ABOUT AMERICAN STANDS, ETC. 27 



tion of the limb touching the stage ; and any instrument 

 having less distance than this will not answer for the 

 purpose, while a half-inch more room would be very 

 desirable. The object of all this is to get room enough, 

 so that we can employ a circular stage large enough to- 

 work an object-carrier. 



Next, see that there are no sub-stage fittings, which, 

 by their paiticular method of attachment, will inter- 

 fere with the stage about to be described. Look the 

 ground over carefully, and, accepting that the road i& 

 all clear, we proceed to describe the stage which the 

 aulhor has had in daily use for years, and one that has,, 

 to a considerable extent, been copied by his friends. 

 Any watchmaker or machinist can do the work in 

 fact, one of my friends made one for himself. 



Provide a sheet of well-hammered brass, heavy enough r 

 so that when planed or turned down the stage shall be 

 one-sixteenth of an inch in thickness, with both faces 

 truly parallel. Cut the circle which is to form your 

 stage as large as your instrument will permit, and in 

 accordance with the above directions. 



Cut the well-hole one-sixteenth of an inch larger 

 than the W3ll-hole of your stage; make a collar, or 

 short tube, out of the same material used for the stage; 

 turn the outside to proper dimensions, so as to fit the 

 well-hole of the new stage, the upper edges of both 

 being " flush," and solder in position. 



Next: Turn accurately the under and projecting part 

 of the short collar, or tube, so that it will exactly fit 

 the well-hole of your main stage ; place it thereon, and 



