NOT ONE BAD IN THIRTY THOUSAND 



One of our customers tells us that he has put up (folded) thirty 

 thousand Lewis Sections in a season, and not found one section in the 

 whole lot that was not perfect. 



CAN WE MENTION ANY MORE CONVINCING EVIDENCE OF 



QUALITY? 



CAN YOU SAY THE SAME OF EVEN FIVE HUNDRED OF ANY 



OTHER MAKE? 



MATERIAL 



Lewis sections are made of Wisconsin Basswood — the best mater- 

 ial known for sections. The stock used is first carefully selected 

 by the lumber people — then when it reaches the Lewis factory it is 

 again sorted by the Lewis Inspector, leaving only the whitest ma- 

 terial to go into Lewis Sections. 



THE V -GROOVE 



The most difficult part to make right in a section is the V- 

 Groove which allows it to fold up into shape — if it is not cut deep 

 enough or if it is cut too deep, the section will break when folding 

 or will be loose at the corners. The Lewis Section expert has been 

 attending to this part of the work for over thirty years. Lewis Sec- 

 tions are perfectly grooved. 



POLISHING AND DOVETAILING 



Lewis Sections are polished on both sides in a double surface 

 sanding machine, which was designed in the Lewis Plant especially 

 for the purpose. The dovetailing of the ends of Lewis Sections is 

 smooth clean and just right. 



PACKING 



Lewis Sections are packed in a tight wooden box entirely en- 

 closing contents — no discoloration from air or sun can occur, no mat- 

 ter how long they are carried in stock — this package is strongly 

 braced at all corners insuring delivei-y in good order. 



Insist on Lewis Sections Look for the Beeware Brand 



G. B. Lewis Company 



MANUFACTURERS 



WATERTOWN WISCONSIN 



