CH. I] 



FIELD OF THE MICROSCOPE 



29 



tion. In removing the ocular, reverse the operation. If the above 

 precautions are not taken, and the oculars fit snugly, there is danger 

 in inserting them of forc- 

 ing the tube of the micro- 

 scope downward and the 

 objective upon the object. 

 46. Putting an object 

 under the microscope. 

 This is so placing an object 

 under the simple micro- 

 scope, or on the stage of 

 the compound microscope, 

 that it will be in the field 

 of view when the micro- 

 scope is in focus ( 47, 69, 



FIG. 28. QUADRUPLE NOSE-PIECE WITH THE 

 FOUR OBJECTIVES IN PLACE. 



fig- 63). 



With low powers, it is not difficult to get an object under the micro- 

 scope. The difficulty increases, however, with the power of the micro- 

 scope and the smallness of the 

 object. It is usually necessary 

 to move the object in various 

 directions while looking into the 

 microscope, in order to get it 

 into the field. Time is usually 

 saved by getting the object in 

 the center of the field with a 

 low objective before putting the 

 high objective in position. This 



B 



09 



32 



FIG. 29. 



16 



8 



4 2 



MICROSCOPIC FIELD WITH AND j s greatly facilitated by using a 

 WITHOUT OCULARS. 



nose-piece, or revolver (fig. 26- 



28). 



47. Field or field of view 

 of a microscope. This is the 

 area visible through a micro- 



A The field of the 2. 4. 8. 16 and 32 

 mm. objectives without an ocular. 



B Field of the same objectives with a 

 5x ocular. 



C Field of the same objectives with a 

 i ox ocular. 



3216,8,4,2 Equivalent focus of SCO pe when it is in focus. When 

 the different objectives whose fields are 

 shown. properly lighted and there is no 



