GEODYNE CURRENT METER CHECKOUT RECORD 

 METER SERIAL NO. MODEL NO. OPERATOR 



1. Checking Exterior 



Shipping Case ^Tle Rods Rotor and Vane End Play 



2. Battery 



Tested ^New Battery Installed 



3. Sequence Timer Number of Lobes on Cam 



4. Checking Data Light Row Platen 



#1 Continuous #2 Inclinometer (^ 



#3-10 Rotor #11-17 Vane 



//18-2A Compass #25 Reference_ 



Loading Film ^Pulley (B) rotated 10 to 20 Rev 



Drive Gears Checked Film Pulley Checked_ 



Closing Meter 



Lens Cap Removed and Taped in Place 



Clean Dust from Lens and Platen 



Desslcant ^Set Toggle Switch 



Inspect End Caps and Pressure Case Surfaces_ 

 Clean and Lubricate O-Rings 



Torque and Tie Rods ^Tape Rotor & Vane_ 



r 



r 



7. Launching Date ^Plant No. ^Depth of Water 



Meter Depth ^Remove Tape 



Time On-Off Switch Removed (GMT) 



Time Meter in Place (GMT) 



Time Meter was Brought Back on Deck (GMT) 



Time On-Off Switch Attached (GMT) 



8. Retrieving 



Figure M-I4. Suggested format for Geodyne current meter checkout record. 



M-12 Change 1—1970 



