E,12 • CITED REFERENCES AND BIBLIOGRAPHY 



40. Lin, C. S., Denton, E. B., Gaskill, H. S., and Putnam, G. L. Diffusion controlled 

 electrode reactions. Ind. Eng. Chem. 43, 2136-2143 (1951). 



41. Hama, F. R. On the velocity distribution in the laminar sub-layer and transition 

 region in turbulent shear flows. J. Aeronaut. Set. 20, 648 (1953). 



42. Elrod, H. G., Jr. Note on the turbulent shear stress near a wall. /. Aeronaut. 

 Sci. 24, 468 (1957). 



43. Latzko, H. Heat transfer in a turbulent liquid or gas stream. NACA Tech. Mem. 

 1068, 1944. 



44. Elser, K. Der Warmeubergang in Rohreinlauf. Allgemeine Wdrmetechnik 3, 1952. 



45. Poppendick, H. F., and Palmer, L. D. Forced convection heat transfer in 

 thermal entrance regions, Part II. Oak Ridge Natl. Lab. Rept. 914, May 1952. 



46. Deissler, R. G. Analysis of turbulent heat transfer and flow in the entrance 

 regions of smooth passages. NACA Tech. Note 3016, 1953. 



47. Deissler, R. G. Turbulent heat transfer and friction in the entrance regions of 

 smooth passages. Trans. Am. Soc. Mech. Engrs. 77, 1221-1233 (1955). 



48. Langhaar, H. L. Steady flow in the transition length of a straight tube. /. Appl. 

 Mech. 9, A55-A58 (1942). 



49. Sparrow, E. M. Analysis of laminar forced-convection heat transfer in entrance 

 region of flat rectangular ducts. NACA Tech. Note 3331, 1955. 



50. Hartnett, J. P. Experimental determination of the thermal entrance length for 

 the flow of water and of oil in circular pipes. Trans. Am. Soc. Mech. Engrs. 77, 

 1211-1220 (1955). 



51. Lyon, R. N. Forced convection heat transfer theory and experiment with liquid 

 metals. Oak Ridge Natl. Lab. Rept. 361, 1949. 



52. Jenkins, R. Variation of the eddy conductivity with Prandtl modulus and its 

 use in prediction of turbulent heat transfer coefficients. Preprints of Papers for 

 1951 Heat Transfer and Fluid Mech. Inst., Stanford, 147-158 (1951). 



53. Lubarsky, B., and Kaufman, S. J. Review of experimental investigations of 

 liquid-metal heat transfer. NACA Tech. Note 3336, 1955. 



54. Deissler, R. G., and Taylor, M. F. Analysis of fully developed turbulent heat 

 transfer and flow in an annulus with various eccentricities. NACA Tech. Note 

 3451, 1955. 



55. Eckert, E. R. G., and Low, G. M. Temperature distribution in walls of heat 

 exchangers composed of noncircular flow passages. NACA Rept. 1022, 1951. 



56. Elrod, H. G., Jr. Turbulent heat transfer in polygonal flow sections. Nuclear 

 Develop. Associates NDA-10-7, New York, 1952. 



57. Lowdermilk, W. H., Weiland, W. F., Jr., and Livingood, J. N. B. Measurement 

 of heat-transfer and friction coefficients for flow of air in noncircular ducts at 

 high surface temperatures. NACA Research Mem. L53J07, 1954. 



58. Knudson, J. G., and Katz, D. L. Fluid Dynamics and Heat Transfer, 1st ed. 

 Univ. Mich. Eng. Research Inst., 1953. 



59. McAdams, W. H. Heat Transmission, 2nd ed. McGraw-Hill, 1942. 



60. Humble, L. V., Lowdermilk, W. H., and Desmon, L. G. Measurements of average 

 heat transfer and friction coefficient for subsonic flow of air in smooth tubes at 

 high surface and fluid temperatures. NACA Rept. 1020, 1951. 



61. Goldman, K. Heat transfer to supercritical water and other fluids with tem- 

 perature-dependent properties. Nuclear engineering. Part I. Amer. Inst. Chem. 

 Engrs., Chem. Eng. Progr. Symposium Series 50, 1954. 



62. Bringer, R. P., and Smith, J. M. Heat transfer in the critical region. Am. Inst. 

 Chem. Engrs. J. 3, 49-55 (1957). 



63. Mosciki, I., and Broder, J. Heat transfer from a platinum wire. Roczniki Chem. 6, 

 319-354 (1926). Complete English translation on file at Eng. Research Lab. Exptl. 

 Sta., E. I. duPont de Nemours and Co., Wilmington, Delaware. 



64. EUion, M. E. A study of the mechanism of boiling heat transfer. Calif. Inst. 

 Technol. Jet Propul. Lab. Mem. 20-88, Mar. 1954. 



65. Farber, E. A., and Scorah, R. L. Heat transfer to water boiling under pressure. 

 Trans. Am. Soc. Mech. Engrs. 70, 369-384 (1948). 



66. McAdams, W. H., Addoms, J. N., and Kennel, W. E. Heat transfer at high 



< 337 > 



