E • CONVECTIVE HEAT TRANSFER AND FRICTION 



rates to water with surface boiling. Mass. Inst. Technol. Rept. ANL-4-268, Dec. 

 1948. 



67. Gunther, F. C. Photographic study of surface-boiling heat transfer to water 

 with forced convection. Trans. Ain. Soc. Mech. Engrs. 73, 115-123 (1951). 



68. Gunther, F. C. Private communication. 



69. Hatcher, J. B. Calif. Inst. Technol. Jet Propul. Lah. Progress Rept. 20-157, 1952. 



70. Cichelli, M. T., and Bonilla, C. F. Heat transfer to liquids boiling under pressure. 

 Trans. Am. Inst. Chem. Engrs. 42, 411 (1946). 



71. Dergarabedian, P. The rate of growth of vapor bubbles in superheated water. 

 J. Appl. Mech. 76, 537-545 (1953). 



72. Parkin, B. R. Scale effects in cavitating flow. Calif. Inst. Technol. Hydrodynam. 

 Lab. Rept. 21-8, July 1952. 



73. Volmer, M. Kinetik der Phasen Bildung. Steinkopff, Dresden, 1939. 



74. Larson, R. F. Factors that influence heat transfer in boiling. Fluid Mech. Inst., 

 Los Angeles, 1953. 



75. Sabersky, R. H., and Gates, C. W. On the start of nucleation in boiling heat 

 transfer. Jet Propulsion 2, 67-70 (1955). 



76. Harvey, E. N. On the cavity formation in water. J. Appl. Phys. 18, 162 (1947). 



77. Jakob, M. Heat Transfer. Wiley, 1949. 



78. Buchberg, H., Romie, F., Lipkis, R., and Greenfield, M. Heat transfer, pressure 

 drop, and burnout studies with and without surface boiling for de-aerated and 

 gassed water at elevated pressures in a forced flow system. Heat Transfer and Fluid 

 Mech. Inst., Stanford, 1951. 



79. Plesset, M. S. Note on the flow of vapors between liquid surfaces. Calif. Inst. 

 Technol. Hydrodynam. Lab. Rept. 26-6 to Office of Nav. Research, 1951. 



80. Rohsenow, W. M., and Clark, J. A. A study of the mechanism of boiling heat 

 transfer. Trans. Am. Soc. Mech. Engrs. 73, 609-620 (1951). 



81. Rannie, W. D. Private communication. 



82. Hatcher, J. B., and Bartz, D. R. High flux heat transfer to JP-3 and RFNA. 

 Coke deposition of JP-3. Calif. Inst. Technol. Jet Propul. Lab. Publ. EP119, 1951. 



83. Sabersky, R. H., and Mulligan, H. E. On the relationship between fluid friction 

 and heat transfer in nucleate boiling. Jet Propulsion 1, 9-12 (1955). 



84. Bromley, L. R. Heat transfer in stable film boiling. Chem. Eng. Progr. 4.6, 221- 

 227 (1950). 



85. Sparrow, E. M., Hallman, T. M., and Siegel, R. Turbulent heat transfer in the 

 thermal entrance region of a pipe with uniform heat flux. Appl. Sci. Research 7, 

 Sec. A, 37-52 (1957). 



86. Deissler, R. G., and Taylor, M. F. Analysis of axial turbulent flow and heat 

 transfer through banks of rods or tubes. TID-7629, Reactor Heat Transfer Conf. 

 of 1966, Ft. 1, Book 1, 416-461 (1957). 



87. Deissler, R. G., and Taylor, M. F. Analysis of turbulent heat transfer in non- 

 circular passages. NACA Tech. Note 4384, 1958. 



Bibliography 



Camack, W. G., and Forster, H. K. Test of heat transfer correlation for boiling 



metals. Jet Propul. 10, 1104-1106 (1957). 

 Forster, H. K., and Greif, R. Heat transfer to a boiling liquid; Mechanism and 



correlations. Dept. of Eng., Univ. Calif., Papers Rept. 7, 1958. 

 Grifiith, P. The correlation of nucleate boiling burnout data. Am. Soc. Mech. Eng. 



Paper 67 HT-21, 1957. 

 Zuber, N., and Tribus, M. Further remarks on the stability of boiling heat transfer. 



Dept. of Eng., Univ. Calif., Rept. 58-6, 1958. 



< 338 > 



