G • COOLING BY PROTECTIVE FLUID FILMS 



layer skin friction and heat transfer — An addendum. /. Aeronaut. Set. 23, 283-284 



(1956). 

 Duwez, P., and Wheeler, H. L., Jr. Preliminary experiments on the sweat-cooling 



method. Calif. Inst. Technol. Jet Propul. Lab. Progress Kept. 3-18, July 1946. 

 Eckert, E. R. G. Oce dimensional calculation of flow in a rotating passage with 



ejection through a porous wall. NACA Tech. Note 3408, Mar. 1955. 

 Eckert, E. R. G. Transpiration and film cooling. Heat Transfer Symposium, Univ. 



Mich. Press, 1953. 

 Eckert, E. R. G., Diaguila, A. J., and Donoughe, P. L. Experiments on turbulent 



flow through channels having porous rough surface with or without air injection. 



NACA Tech. Note 3339, 1955. 

 EUerbrock, H. H., Jr. Some NACA investigation of heat transfer characteristics of 



cooled gas-turbine blades. General discussion on heat transfer. Inst. Meek. Engrs. 



London, Sept. 1952. 

 Emmons, H. W., and Leigh, D. Tabulation of the Blasius function with blowing and 



suction. Harvard Univ. Combustion Aeronaut. Lab., Div. Appl. Sci., Interim Tech. 



Kept. 9, Nov. 1953. 

 Green, L., Jr. Gas cooling of a porous heat source. /. Appl. Mech. 19, 173-178 (1952). 

 Grootenhuis, P., and Moore, N. P. W. Some observations on the mechanics of sweat 



cooling. Seventh Intern. Congress Appl. Mech., London, 1948. 

 Grootenhuis, P., et al. Heat transfer to air passing through heated porous metals. 



General discussion on heat transfer. Inst. Mech. Engrs. London, 405-409 (1952). 

 Howarth, L. Modern Developments in Fluid Dynamics, High Speed Flow, Vol. II, 



Chap. XIV. Oxford Univ. Press, 1953. 

 Ivey, R. H., and Klunker, E. B. An analysis of supersonic aerodynamic heating with 



continuous fluid injection. NACA Kept. 990, 1950. 

 Jakob, M., and Fieldhouse, I. B. Cooling by forcing a fluid through a porous plate in 



contact with a hot gas stream. Heat Transfer and Fluid Mech. Inst., June 1949. 

 Lees, L. Stability of the laminar boundary layer with injection of cool gas at the wall. 



Project Squid Tech. Kept. 11, May 1948. 

 Lew, H. G., and Fanucci, J. B. On the laminar compressible boundary layer over a 



flat plate with suction or injection. J. Aeronaut. Sci. 22, 589-597 (1955). 

 Livingood, J. N. B., and Eckert, E. R. G. Calculation of transpiration-cooled gas- 

 turbine blade. Trans. Am. Soc. Mech. Engrs. 75, 1271-1278 (1953). 

 Mayer, E., and Baras, J. Q. Transpiration cooling in porous metal walls. Jet Pro- 

 pulsion 24, 366-368, 378, 386 (1954). 

 Muskat, M. The Flow of Homogeneous Fluids Through the Porous Media. McGraw- 

 Hill, 1937. 

 Staniforth, R. Contribution to the theory of effusion cooling of gas turbine blades. 



General discussion on heat transfer. Inst. Mech. Engrs. London, Sept. 1951. 

 Yuan, S. W. Further investigation of laminar flow in channels with porous walls. 



J. Appl. Phys. 27, 267-269 (1956). 

 Yuan, S. W. Preliminary investigation of heat transfer in turbulent boundary 



layer on a porous wall. Project Squid Tech. Kept. 19, 29-36 (1950). 

 Yuan, S. W., and Barazotti, A. Experimental investigation of turbulent pipe flow 



with coolant injection. Heat Transfer and Fluid Mech. Inst., June 1958. 

 Yuan, S. W., and Chin, C. Heat transfer in a laminar boundary layer on a partially 



sweat-cooled plate. Project Squid Tech. Rept. 13, Aug. 1949. 

 Yuan, S. W., and Whitford, C. Further investigation of heat transfer in a laminar 



compressible boundary layer on a porous plate with fluid injection. Project Squid 



Tech. Rept. 14, Sept. 1949. 



< 488 > 



