Riv. Bas. Sur. 
Par. No. 30] STUTSMAN FOCUS-—-WHEELER 191 
component rim types that are introduced here by me; and that 116 
rim-and-lip and shoulder sherds are assignable, or probably assign- 
able, to 9 (rim) types named and described herein (see Appendix), 
or previously named and defined in the literature. In the following 
pages, I will first describe by ware and rim type the identifiable 
pottery specimens; and then I will describe the fragmentary rim, 
near-rim, shoulder and body sherds, and appendages, which are not 
identifiable, or are not identifiable with assurance, as to type but 
which undoubtedly belong to one or another of the recognized types, 
according to the decorative treatment and surface finish manifested 
by each group. At least 580 vessels appear to be represented by the 
identifiable rim-and-lip and shoulder sherds in the Hintz pottery 
sample. 
PARKHURST INCURVED BIM WARE 
(Ware sample: 2 composite and 6 individual rim-and-lip sherds.) 
PASTE: 
Temper: Sparse to medium amounts of fine to coarse grit, up to 3.5 mm. in 
diameter, consisting mainly of quartz. 
Texture: Core, compact-contorted ; surfaces, fine, unslipped. 
Color: Core, gray; surfaces, brownish gray to dark gray. 
Hardness: 3 (calcite) to 4 (fluorite). 
TECHNIQUE OF MANUFACTURE: Probably lump modeled, then thinned by paddle and 
anvil. 
SURFACE FInIsH: Exterior, vertically simple stamped (i.e., thong-wrapped paddle 
or grooved paddle impressed) and partially smoothed, or smoothed; 
interior, roughly smoothed, or smoothed. 
ForM: 
Lip: Rounded. 
Rim: Straight and ineurved. 
Neck: No data. 
Shoulder: No data. 
Body: No data. 
Base-Bottom: No data. 
Appendages: No handles and lugs present. 
DECORATIVE TREATMENT: Rectilinear wrapped-stick impressions on the exterior 
lip only (see below). 
COMPONENT RiM TypeE: Parkhurst Dentate Stamped. 
Parkhurst Dentate Stamped 
(Pl. 30, @) 
(Type sample: 2 composite and 6 individual rim-and-lip sherds, representing 
6 vessels. ) 
ForM: 
Lip: Rounded and slightly to markedly extruded exteriorly and/or interiorly ; 
4.75 mm. to 7.75 mm. in width. Extrusion of the lip appears to have been 
produced by compression of the plastic clay in the process of decoration. 
Rim: Straight and incurved, of indeterminate height. Wall, 5 to 7 mm. in 
thickness. 
