See Table 2. 



@ 



Measure at top of shaft only unless shaft is not 

 resting on bottom of bearing, in which case re- 

 port sum of top and bottom clearances. Never 

 measure side clearances. When bearings are re- 

 wooded, indicate clearances as follows: 



As found 

 As released 



If the ship is equipped with rubber bearings, 

 note the fact. Mention if state of wear or dam- 

 age indicates that renewal of these bearings 

 should be made at the next docking. If the upper 

 strips are, or have been, interchanged with the 

 lower, the fact should be noted. 



42 



