2-68 BOAT HULL DESIGN 



REFERENCES 



(1) Murray, A. B. , "The Hydrodynamics of Planing Hulls", 

 Transactions of Society of Naval Architects and Marine 

 Engineers, 1950 



(2) Culwick, E. F. and Savitsky, D. , 'Design and Development 

 of an Outboard Runabout Boat '. 13th Annual Technical and 

 Management Conference, Reinforced Plastics Division, The 

 Society of the Plastics Industry, Inc. 



(3) "Rules for the Construction and Classification of Wood Yachts", 

 Lloyd's Register of Shipping, London, 1929 



(4) Herreschoff, N. G. , Rules for the Construction, The Scantlings, 

 and the Other Proportions of Wooden Yachts", 1927 



(5) Nevins, H. B. , "Proposed Scantling Rules for Wooden Yachts", 1938 



(6) Yustein, S. E. , "Report of Specification Development on 

 Adhesives for Glass -Reinforced Plastics", Progress Report 

 No. 5, Laboratory Project 5616-1, Material Laboratory, 

 New York Naval Shipyard, 26 April 1956 



(7) Huffington, N. J. Jr. , and Hoppmann, W.H. II 'Blast Loading 

 of Orthotropic Plates", Operations Research Office, Johns 

 Hopkins University (Armed Forces Technical Information 

 Agency No. AD28929) 



(8) Bell, E. R. , Peck, E. C. , and Krueger, N. T. , "Modulus of 

 Elasticity of Wood Determined by Dynamic Methods " Forest 

 Products Laboratory Report No. 1977, April 1954 



(9) Kellam, B. , "Evaluation of Reinforced Plastic Pipe ', 11th 

 Annual Technical and Management Conference, Society of 

 the Plastics Industry, Inc. , February 1956 



(10) Markey, M. F. and Carpini, T. D. , "Rough-Water Impact-Load 

 Investigation of a Chine-Immersed V-Bottom Model having a 

 Dead -Rise Angle of 10 Degrees", National Advisory Committee 

 for Aeronautics Technical Note 4123, Washington, October 1957 



(11) Mayo, Wilbur L. , "An Analysis and Modification of Theory 



for Impact of Seaplanes on Water", National Advisory Committee 



for Aeronautics Technical Note No. 1008, Washington, December 1945 



