MATERIALS AND MOLDING METHODS 4-21 



REFERENCES 



(1) Sonneborn, R. H. , Fiberglas Reinforced Plastics, Reinhold 

 Publishing Corporation, New York, 1954 



(2) Perry, H. A. Adhesive Bonding of Plastics, McGraw-Hill 

 Book Co. , Inc. , New York, 1959 



(3) Dietz, A. G. H. - Engineering Laminates - John Wiley & Sons, 

 Inc. , New York, 1949 



(4) Engel, H. C. et al - Structural Plastics, McGraw-Hill Book 

 Co., Inc., New York, 1st Ed. , 1950 



(5) Modern Plastics Encyclopedia - Modern Plastics, 

 575 Madison Ave. , New York 22, N. Y. , 1959 



(6) Delia Rocca, R. - Reinforced Plastics in Boat Hull 

 Construction - 12th Annual Technical and Management 

 Conference, Reinforced Plastics Division, Society of 

 the Plastics Industry, Inc. , 1957 Reprint - Plastics 

 Technology, November 1957 and December 1957 



(7) Morgan, P. et al - Glass Reinforced Plastics - Iliffe & Sons, Ltd. 

 London, Philosophical Library, 2nd Edition, 1957 



(3) Gray, L. B. , Molding Fiberglass Reinforced Plastic Boat Hulls 



in Matched Metal Dies, 14th Annual Technical and Management 

 Conference, Reinforced Plastics Division, The Society of the 

 Plastics Industry, Inc. , 1959 



(9) Culwick, E. F. , Pressure Bag Molding of Reinforced Plastic 

 Boat Hulls, 14th Annual Technical and Management Conference, 

 Reinforced Plastics Division, The Society of the Plastics 

 Industry, Inc. , 1957 



(10) Moore, L. D. , Lahde, P. P. , Evaluation of Laminate Construction 

 for Boats, 13th Annual Technical and Management Conference, 

 Reinforced Plastics Division, The Society of the Plastics 

 Industry, Inc. , 1957 



(11) Limbach, A. P. , Madden, J. J. , A Commercial Process for 

 Epoxy Boats, 14th Annual Technical and Management 

 Conference, Reinforced Plastics Division, The Society of 

 the Plastics Industry, Inc. , 1959 



(12) Raffel, B. D. & McDonald, W. C. , Matched Die Molding 



of a Large Outboard Motor Boat Hull, 11th Annual Technical 

 and Management Conference, Reinforced Plastics Division, 

 The Society of the Plastics Industry, Inc. , 1956 



(13) Sprayup - Exciting Economies for Reinforced Plastics - 

 Modern Plastics, May 1959, Volume 36, Number 9 



