164 OPERATIONAL AND EMERGENCY BILLS 



5. Notify support vessel that power has been restored. 



To transfer power from alternate to normal supply (when indicator lamp on power panel 

 shows normal power available). 



1. Move all switches on main power panel to OFF . 



2. Move normal power supply switch to ON . 



3. Move remaining switches, one at a time, to ON. (These are the load switches, No. 

 1-4P-A to 1-4P-F.) 



4. Notify support vessel to switch off alternate power. Note: Normal power supply is 

 from shore. Alternate power supply is from support vessel. 



STAGING VESSEL FOUL-WEATHER BILL 



1. Take hourly tensiometer readings on each leg and record. Note change. Tension should 

 not exceed 50,000 lb. 



2. Request ComServRon One ATF to stand by. Alert Gear. If ATF not available, request 

 Gear to stand by. 



3. Notify Commander, Naval Base, San Diego, of situation and alert for possible assistance. 



4. Secure all loose gear. 



5. Send all boats except one LCM to Quivira Basin, Mission Bay. 



6. Set up special 24-hour watch. 



7. Check position of "dumb waiter" line extending from Staging Vessel to Sealab II. 



8. Check position of Sealab n acoustically every hour or oftener. 



9. Check mooring legs for signs of dragging. 



10. If situation deteriorates, have ATF or Gear attach tow line, preferably nylon, and re- 

 lieve strain or leg with the highest tension. 



11. In the event an anchor drags, shift pull of ATF to compensate. 



12. Maintain constant communication with all concerned. 



STAGING VESSEL MOOR SLIPPING BILL 



When weather and wave -prediction information indicate a hazardous condition is imminent, 

 it will be necessary to move the staging vessel into the San Diego Harbor. These warnings 

 should be received at least 24 hours in advance. The following procedure shall be followed for 

 slipping the mooring: 



1. Request a ComServRon One ATF at site with at least one YTM or YTB tug. If ATF not 

 available, request Gear. 



2. When tow line is attached to staging vessel, remove legs generally in inverse order of 

 mooring. Buoy wire off with 59-in. spherical buoys or equivalent. Great care must be ex- 

 ercised so that nothing is dropped on Sealab n and that all connections to Sealab II are broken. 



3. Take Staging Vessel into San Diego escorted by YTM or YTB tug. 



4. Send all boats to Quivira Basin, Mission Bay, LaJoUa. 



