TM No . 377 



APPENDIX C 

 MISCELLAIffiOUS TABULATED DATA 



Wave lyfeter Calibration Ifata 



Rotating Boom Calibration of OMDUM II - The OMDUM II wave meter 

 system was calibrated using the rotating boom tow system of the Depart- 

 ment of Civil Engineering^ Worcester Polytechnical Institute, Worcester, 

 Mass., on 11 and 15 June I96U. 



The calibration equipment details and procedures are discussed in 

 chapter II. The following two series (l and 2) contain tabulations of 

 the calibration data used for preparing the calibration curves of figures 

 II-9 and 11-12. 



Series 1. Data were tabulated from OMDUM II towed at steady speed 

 with the w cylinder axis parallel to the tangential velocity vector Vt 

 (figure 11-10). The water temperature was 20.6°C. These data include 

 run number, Vrp (cm sec~l), pulses per cycle per sec (peps), and time 

 spacing between voltage pulses (milliseconds per cycle). 



-1 



C-1 



