110 EXPLORATION OF BURTON MOUND [ETH. ANN. 44 
Tip fragment of bone point, 36.5 mm. long, 10 mm. wide, 4 mm. thick. 
Edges rounded, the left edge forming quite a sharp corner with the obverse. 
The inside surface consists largely of a furrow. The tip bends to the right. 
The extreme tip is broken off. 
Tip fragment of bone point, 44 mm. long, 5.5 mm. wide, 3 mm. thick. This 
is a splinter of a bone point, only the original tip remaining intact. All other 
surfaces except the outside are fractures. 
Central fragment of bone point, 55 mm, long, 7 mm. wide, 6.5 mm. thick. 
Perhaps a half inch of the tip is missing. 
Tip fragment of bone point, 34 mm. long, 10.5 mm. wide, 5.5 mm. thick. 
There is a slanting flake off the inside surface of the point. 
Entire bone point or awl, 67 mm. long, 11 mm. wide, 2.75 mm. thick. The 
butt end is worked somewhat rounding and a browner color extends about 
a third of the way up the inside surface. The specimen is very strong. The 
extreme tip is broken off. 
Apparently butt fragment of bone point, 63 mm. long, 9 mm. wide, 6.5 mm. 
thick. Both edges are old breaks worn smooth by use but not worked. The 
lower third of the specimen is quite black. The tapers on the inside from 
15 mm., on the inside surface from 25 mm. 
Tip fragment of or perhaps entire bone point. Inside surface flat and 
shows longitudinal corrugations. 64.5 mm, long, 8.5 mm. wide, 5 mm. thick. 
Both edges are squared. The butt is a fracture but is considerably worn. 
There are flecks of coquina material stuck on the surface near the butt. 
Tip fragment of bone point, 18 mm. long, 9.5 mm. wide, 4 mm. thick. The 
surface is blackened in places. The inside surface consists of a furrow. The 
outside is beveled from 4 mm., the inside hardly at all. Edges rounded. A 
mere tip fragment. 
Central fragment of bone point. Inside surface shows longitudinal groove. 
33 mm. long, 10 mm. wide, 4.5 mm. thick. Edges rounded, the left edge being 
thicker than the right. The beveling off the tip starts about 7 mm. from the 
tip fracture. 
Tip fragment of bone point, 28 mm. long, 10 mm. wide, 5 mm. thick. The 
inside surface is spongy and irregularly bulging and seems like a fracture. 
The left edge is quite sharp, the right rounded. 
Tip fragment of bone point, 54 mm. long, 9.5 mm. wide, 9 mm. thick. The 
extreme tip has been broken off. The left edge is the original surface of the 
bone. The specimen starts to taper 283 mm. from the tip. 
Central fragment of bone point, 38.56 mm. long, 6 mm. wide, 4 mm. thick. 
The outside consists of a single fracture. The right edge is also formed of the 
old inside surface of the bone. Extreme tip broken off. 
Tip fragment of bone point, 55 mm. long, 12.5 mm. wide, 3.5 mm. thick. 
Dark coffee color. Tip charred. Tip tapers from 13 mm. on obverse and 
reverse sides. Butt broken diagonally. 
Tip fragment of bone point, 24 mm. long, 29 mm. wide, 4.5 mm. thick. Out- 
side consists of a shallow furrow. ‘Tip is ground off square, leaving a stub 
3 mm. wide and 1.75 mm. thick. Though the edges are somewhat rounded, a 
section of the specimen is rectangular. 
Tip fragment of bone point, 87 mm. long, 9 mm. wide, 4 mm. thick. 
Butt fragment of bone point, 37 mm. long, 13 mm. wide, 9.5 mm. thick. The 
butt consists of a natural articulation of the bone, but has been somewhat 
ground off. The edges have been worked rounding. Evidently a fragment of 
an awl. 
