HARRINGTON ] DESCRIPTION OF THE ARTIFACTS 113 
Central fragment of bone implement. Reverse consists of the former inside 
surface. 43 mm. long, 14.5 mm. wide, 4 mm. thick. The edges are squared. 
Outside and inside surfaces are apparently unworked. 
Tip fragment of bone point, 24 mm. long, 6 mm. wide, 3.5 mm. thick. Hlliptical 
in section. Edges rounded. The lower part of the left edge is broken away. 
Tip abraided but evidently extended no farther formerly. Inside shows a 
natural furrow. Tip bends to the left. 
Tip fragment of bone point. Outside can not be determined. 15 mm. long, 
5 mm. diameter. Jet black in color. Tip taper starts 7.5 mm. back and tapers 
equally from all sides. Elliptical in section. Butt broken off diagonally. 
Fragment of bone implement, 42 mm. long, 6 mm. wide, 5 mm. thick. The 
right edge is a fracture, the left edge is natural surface. 
Tip fragment of bone point. Outside can not be determined. 30 mm. long, 
4 mm. wide, 3.5 mm. thick. The point bends to the right and twists in clockwise 
direction. The obverse is flat, the reverse has two faces, making the specimen 
triangular in section. 
Tip fragment of bone point. Outside can not be determined, since obverse 
and reverse surfaces are fractures. 50 mm. long, 5 mm. wide, 4.5 mm. thick. 
The upper end is worked to a tip in the usual manner. The breaks are old and 
the color of the bone is mellowed. 
Central fragment of bone implement, 44 mm. long, 7 mm. wide, 5.5 mm. thick. 
Rather fresh looking. Triangular in section. Cracked longitudinally. There 
are several transverse scorings on the right half of the upper inside. 
Central fragment of bone implement, 32.5 mm. long, 15 mm. wide, 2.5 mm. 
thick. Both edges are square fractures, as if by chance. The top is broken 
off. A transverse groove has been cut in the specimen and the tip fracture is 
just beyond this groove. 
Tip fragment of bone point. Outside can not be determined. 30 mm. long, 
5 mm. wide, 4 mm. thick. Black and glassy, one of the most mineralized of 
the specimens. The butt fracture reveals a spongy interior. The point is 
shaped very blunt, taper starting only two or three millimeters from the end. 
The specimen is nearly round in section and its surface presents several longi- 
tudinal grooves. 
Tip fragment of bone point. Outside can not be determined. 37.5 mm. long, 
6.5 mm. wide, 2 mm. thick. The extreme thinness and the flatness of the 
obverse make this specimen unique. The edges are rounded, and there is a 
well-made eibow in the left edge 10 mm. from the butt fracture. The thinness 
of the specimen would preclude its use for any purpose for which strength is 
required. 
Tip fragment of bone point. Outside can not be determined. 23 mm. long, 
5.5 mm. wide, 2.6 mm. thick. Dark mellowed color. Flattish in section. 
Central fragment of bone implement. Outside can not be determined. 53 mm. 
long, 5.5 mm. diameter. The specimen is somewhat crooked and twisted. 
Central fragment of bone implement. Outside can not be determined and a 
little of the original surface is left. 35 mm. long, 6 mm. wide, 2 mm. thick. 
Both ends are sharp as the result of old fractures. Mellowed color, glassy. 
Central fragment of bone point. Outside can not be determined. 38 mm. 
long, 6 mm. diameter. Round in section. Ashy gray color, verging toward 
fiesh color. Made of spongy bone. 
Tip fragment of bone implement, 27 mm. long, 7 mm. wide, 4 mm. thick. The 
outside consists of a fracture. Dark earth-colored substance is stuck on more 
or less all over the specimen. Both edges tend to be quite sharp. 
