114 EXPLORATION OF BURTON MOUND [ETH. ANN, 44 
Tip fragment of bone point, 31 mm. long, 6 mm. wide, 4 mm. thick. Dark mel- 
lowed, glassy. The inside consists of three fractures. Left edge sharp. The 
tip is beveled from 7 mm. with a straight bevel. 
Tip fragment of bone point. Outside can not be determined. 24 mm. long, 
4 mm. wide, 3.5 mm. thick. The obverse and right edge is the former surface 
of an artifact; all other surfaces are fractures and exhibit five different cleav- 
ages. The tip is formed by these cleavages and shows no workings. A mere 
splinter off a bone artifact. 
Central fragment of bone point. Outside can not be determined. 31 mm. long, 
3mm. diameter. The lower end is square, as if rubbed to this shape. Round in 
section. Old mellowed color, blackened except at the tip. 
Butt fragment of bone implement, 33.5 mm. long, 10 mm. wide, 8.5 mm. thick. 
The smaller end is evidently the butt and is neatly squared. Hlliptical in sec- 
tion. The other end is broken with an old fracture. Coffee color, of more or 
less mineralized appearance. 
Central fragment of bone implement. Outside can not be determined. 50 mm. 
long, 9 mm. wide, 8 mm. thick. On the obverse surface at the tip there is a flat 
beveling which extends two-thirds of the way through the specimen. The lower 
part of the observe surface is broken away. Mellowed color, glassy. 
Tip fragment of bone point, 23 mm. long, 10 mm. wide, 2.56 mm. thick. The 
left edge is rounded. Outside and inside are original surfaces. The upper 
right edge which forms the point is a fracture, but was probably made 
intentionally. : 
Tip fragment of bone point, 47.5 mm, long, 7 mm. wide, 3.5 mm. thick. 
Reverse has broad longitudinal furrow. All edges nicely rounded. The upper 
right edge slants to form the tip, presenting a straight edge 18.5 mm. 
Tip fragment of bone point. Inside shows a furrow. 24 mm. long, 5 mm. 
wide, 3.5 mm. thick. Squarish in section. Crudely made of the wall of a long 
bone. 
Tip fragment of bone point. Outside can not be determined. 30 mm. long, 
5 mm. wide, 3 mm, thick. The surfaces consist mostly of fractures, which 
makes the specimen triangular in section. 
Tip fragment of bone point. Outside can not be determined. 31 mm. long, 
3.5 mm. diameter. Round in section. The left edge is the old surface of the 
artifact, all other surfaces are fractures. 
Central fragment of bone point, 32.5 mm. long, 9 mm. wide, 5 mm. thick. 
The reverse has a wide furrow. Both edges are fractures. Outside and inside 
surfaces taper from 8 mm. The point consists of a broad rounding edge. 
Central fragment of bone point, 34.5 mm. long, 10.5 mm. wide, 6 mm. thick. 
A furrow is seen in the lower half of the inside surface. Blackish color. 
Central fragment of bone implement. . Outside can not be determined. 35 
mm. long, 9 mm. wide, 7 mm. thick. All surfaces are smooth. Obverse and 
reverse are natural surfaces and the left edge is the unworked corner between 
them. The right edge has two worked corners with a wide furrow, making 
the specimen triangular in section. 
Central fragment of bone point. Outside can not be determined. 88 mm. 
long, 7 mm. diameter. The right edge is a fracture except for a section 4 mm. 
in the central portion of the specimen. Blackish and glassy. 
Central fragment of bone point, 53 mm. long, 8 mm. wide, 5 mm. thick. Very 
irregular shape owing to surface fractures. The right edge is rounded and 
shows hair like transverse raspings throughout its length. The reverse is a 
natural inside surface of the bone. The left edge consists of two fractures, 
the upper one of which hits the top of the specimen, taking the original tip 
