174 



Tables 173-176. 



TENSION OF LIQUIDS. 



TABLE 173. — Surface Tension of Llqiulds.' 



Liquid. 



Water 



Mercury .... 



Bisulphide of carbon . 

 Chloroform .... 

 Ethyl alcohol 



Olive oil ... . 

 Turpentine .... 

 Petroleum .... 

 Hydrochloric acid 

 Hyposulphite of soda solution 



Specific 

 gravity. 



I.O 



13-543 

 1.2687 

 1.4878 

 0.7906 

 0.9136 

 0.8S67 

 •7977 



l.IO 



1. 1248 



Surface tension in dynes per cen- 

 timeter of liquid in contact with — 



Air. 



75.0 



5'3-o 

 30.5 

 (3 '-8) 

 (24.1) 

 34-6 

 2S.8 

 29.7 



(729) 

 69.9 



Water. Mercury. 



0.0 



392.0 



41.7 



26.S 



18.6 



"•5 

 (28.9) 



(392) 



(387) 

 (415) 

 364 



yi 

 241 



271 



(392) 

 429 



TABLE 175. — Tension of Soap Films. 



Elaborate measurements of the thickness of soap films have been made by Reinold and 

 Rucker.ll They find that a film of oleate of soda solution containing i of soap to 70 of 

 water, and having 3 per cent of KNO3 added to increase electrical conductivity, breaks at 

 a thickness varying between 7.2 and 14.5 micro-millimeters, the average being 12.1 micro- 

 millimeters. The film becomes black and apparently of nearly uniform thickness round 

 the point where fracture begins. Outside the black patch there is the usual display of 

 colors, and the thickness at these parts may be estimated from the colors of thin plates 

 and the refractive index of the solution. 



When the percentage of KNO3 is diminished, the thickness of the black patch increases. 

 For example, KNO3 =3 i 0.5 0.0 



Thickness = 12.4 13.5 14.5 22.1 micro-mm. 



A similar variation was found in the other soaps. 



It was also found that diminishing the proportion of soap in the solution, there being 

 no KNOs dissolved, increased the thickness of the film. 



I part soap to 30 of water gave thickness 21.6 micro-mm. 



I part soap to 40 of water gave thickness 22.1 micro-mm. 



I part soap to 60 of water gave thickness 27.7 micro-mm. 



I part soap to 80 of water gave thickness 29.3 micro-mm. 



* This table of tensions at the surface separating the liquid named in the first colunm and air, water or mercury 

 as stated at the head of the last three columns, is from Quincke's experiments (Pogg. Ann. vol. 130, and Phil. Mag. 

 1871). The numbers given are the equivalent in dynes per centimeter of those obtained by Worthinsiton from 

 Quincke's results (Phil. Mag. vol. 20, 1S85) with the exception of those 'n brackets, which were not corrected by 

 Worthington ; they are probably somewhat too high, for the reason stated by Worthington. The temperature was 

 about 20° C. 



t Quincke, " Pogg. Ann." vol. 135, p. 661. 



i It will be observed that the value here given on the authority of Quincke is much higher than his subsequent 

 measurements, as quoted above, give. 



N " Proc. Roy. Soc." 1877, and " Phil. Trans. Roy. Soc." i88i, 1883, and iSgv 



Note. — Quincke points out that substances may be divided into groups in each of which the ratio of the surface 

 tension to the density is nearly constant. Thus, if this ratio for mercurv be taken as unit, the ratio for the bromides 

 and iodides is about a half : that of the nitrates, chlorides, sugars, and fats, as well as the metals, lead, bismuth, and 

 antimony, about i ; that of water, the carbonates, sulphates, and probably phosphates, and the metals platinum, gold« 

 silver, cadmium, tin, and copper, 2 ; that of zinc, iron, and palladium, 3; and that of sodium, 6. 



Smithsonian Tables. 



