302 HYALONEMA (PRIONEMA) FIMBRIATUM. 
The part of the curve between 304.49 and 490.38 w pertains to the large 
amphidises with smooth, divergent anchor-teeth, A; the part between 34.00 and 
334.93 » to the amphidiscs with fimbriate, convergent anchor-teeth, B; and the 
part between 14.42 and 41.14 » to the amphidises with smooth anchor-teeth with 
parallel end-parts, C. There is no dimensional overlapping of A and B and only 
a slight overlapping of B and C, 14.42 and 34.00. The dimensionally transitional 
forms of B and C causing this overlapping are, however, rare, so that the part 
of the curve between 14.42 and 34.00 pertaining to them lies quite low. The 
three differently shaped amphidise-forms (A, B, and C) are differentiated accord- 
ingly not only in regard to their shape but also in regard to their size (length). 
Fig. 15 further very clearly shows that the amphidises A and C vary 
only slightly in size and form biometrically homogeneous groups, and that the 
amphidise B has a very wide range of dimensional variation and does not 
form a biometrically homogeneous group. The part of the frequency-curve 
pertaining to this group exhibits one high and rather broad and three smaller 
elevations. This shows that the main-group B consists of four secondary groups, 
the amphidises belonging to one of which are frequent, those belonging to the 
three others, rare. It is therefore advisable to distinguish six groups (three 
main-groups, one of which, B, comprises four secondary groups) of amphidises 
in the sponges here described:— A, macramphidises, Ba, largest fimbriate 
amphidises, Bb, large fimbriate amphidises, Be, small fimbriate amphidises, 
Bd, smallest fimbriate amphidises, and C, micramphidises. 
The macramphidiscs (Plate 59, figs. 1-6; Plate 62, fig. 31) are 335-446 » long, © 
most frequently about 400 u. The shaft is cylindrical, straight, 8-16 u thick, 
most frequently about 12 yu, and abruptly thickened in or near the middle to a 
central tyle 11-22 » in transverse diameter. The proportion of the thickness 
of the adjacent parts of the shaft to the thickness of the tyle is 100 to 121-167. 
From the tyle a verticillate bunch of spines arises. The number of the spines 
forming this bunch is variable. Sometimes they are few in number and small 
in size (Plate 59, fig. 2), sometimes numerous and large (Plate 59, fig. 1). Forms 
intermediate between these extremes are the most frequent. The spines form- 
ing these bunches are irregularly distributed and, when few in number, fre- 
quently confined to,one side of the shaft. The individual spines are 7-26 u 
long, 4-5.5 uw thick at the base, cylindrical throughout and terminally rounded, 
or attenuated distally, truncate, and provided with a cluster of exceedingly 
minute secondary spinelets on the terminal face. The primary spines arise 
vertically or steeply from the central thickening of the shaft and are, farther on, 
