Appendix B 
SPECIFICATIONS OF OIL USED IN THE TEST MIXTURE 
AND THE OIL INSPECTION PUMP 
This appendix lists the specification of 
(a) the oil used in the test mixture 
(b) the oil inspection pump 
Hydraulic Fluid - Petroleum Base 
Mil. spec.: MIL-H-5606C 
Fed. Stock No.: FSN 9150-223-4134 
Specific gravity: 0.88 to 0.90 
Color: red 
Kinematic viscosity: 8.0 stokes at 40 degrees F 
to 0.10 stokes at 130 degrees F 
Oil Injection Pump 
Fluid Metering Corp 
FMI Model RRP-F 
with 3/8-inch piston, 0-100 cc/min at 50 psi. Variable flow 
with micrometer flow adjustment head. Electric motor drive. 
115V, 4.5A at 60 cycles, 1725 rpm. 
ACKNOWLEDGMENTS 
John B. Curry assisted in the laboratory tests of the 
experimental elements 
REFERENCES 
Ibo Naval Civil Engineering Laboratory. Mechanical and electrical 
engineering department, letter report, YF38.554.001.01.001: 
Program plan for oily waste handling at navy shore establishment, 
by E.L. Ghormley, Ph.D., Port Hueneme, California, June 1972. 
Die S.M. Finger and R.B. Tabakin, Development of shipboard 
oil/water separation systems, ASME paper 73-ENAS-38, presented 
at the intersociety conference on Environmental Systems, San 
Diego, California, July 16-19, 1973. 
36 U.S. Navy Case 56,734: Patent application on coanda effect 
oil=water separator, by A.J. Paszye, Ph.D: Ds Pall land JBe Cusays 
15 June 1973. 
34 
