APPENDIX A-SLOW-SCAN TV TEST OPERATING INSTRUCTIONS 



TO SEND VOICE AT ANY TIME 



1 . Turn TRANSMIT SELECT on Robot to VOICE. 



2. Use UQC as usual. 



TO SEND VIDEO FROM TAPE * 



1. Make sure cassette recorder is on and TEST TAPE is rewound and ready. If not 

 turn POWER (T 1) on then STOP (Til) then EJECT (T 12) and insert TEST 

 TAPE. Close lid and hit REWIND (T 7) until tape is rewound. Hit STOP. 



2. On cassette recorder make sure CRO2 (T 3) is down and DOLBY (T 2) is up. 



3. Adjust OUTPUT (T 5) on cassette recorder to match red index. 



4. On Robot make sure DISPLAY (R2), POWER (R 4) and MEMORY INPUT (R 5) 

 toggles are up and MEMORY INPUT (R 7) switch is at TAPE. 



5 . Make sure WIDTH (RIO), RECEIVE CONTRAST (R 9) and RECEIVE 

 BRIGHTNESS (R 8) on Robot are pointing to red index. 



6. Turn monitor on and align to red indices on all front panel controls. 



7. You are now ready to send video. To send video hit UQC mike button (push to 

 talk button must be held on for duration of video transmission) turn Robot 

 TRANSMIT SELECT (R 1) to TAPE and depress PLAY (T 9) on tape recorder. 

 Pictures will appear on monitor in a few seconds. 



8. Terminate video by pressing STOP (T 1 1) on cassette recorder and turning 

 TRANSMIT SELECT (R 1) on Robot to VOICE (UQC normal operation is now 

 enabled). 



9. Rewind tape by pressing REWIND (T 7) on cassette recorder and STOP when 

 rewound. 



TO SEND VIDEO FROM CAMERA WHILE RECORDING ** 



1. Make sure a RECORD TAPE is in cassette recorder and recorder is stopped. If 

 not depress STOP (Til) then EJECT (T 12) and insert RECORD TAPE. Do not 

 rewind RECORD TAPES. Use RECORD TAPES in indicated order as needed. 



2. Make sure on cassette recorder POWER (T 1) and CRO2 (T 3) are down and 

 DOLBY (T 2) is up. 



3. Align LEFT RECORD LEVEL (T 4) slide control on cassette recorder to red 

 index. 



4. On camera make sure POWER is on, ALC is ON and SYNC is LINE. 



5. Make sure monitor is on and all front panel controls are aligned to red indices. 



"Steps 1 through 9 are required for initial tape transmissions. For each subsequent tape transmission only 

 steps 7 through 9 are required provided that only voice transmissions have occurred since last tape trans- 

 mission. 



*Steps 1 through 12 are required for initial transmissions from camera. For each subsequent transmission 

 from camera only steps 8 through 12 are required provided that only voice transmissions have occurred 

 since last camera transmission. 



23 



