4.2 Remove the bottom toggle bolt on the stiff leg and remove the 

 davit. Store the davit on the ground temporarily. 



4.3 Pick up the two hull wing supports and store them in the main 

 deck, forward or center, hatch. 



BOW BOOM GUIDES 



5.1 Insert the bow boom guides in the holes provided in the bow 

 section of the boat. 



6. THE CONTROL CONSOLE 



6.1 Remove the lock on the console hatch located on the starboard 

 side, aft, and lift the hatch to an open position. 



6.2 Grasp the control console and carefully lift it to an upright 

 position, tilt it slightly forward in order to be able to 

 close the console hatch and then tilt the control console back 

 to an upright position. Figure C-18. Lock it with the two locks 

 provided on the deck. 



7. SAFETY RAILS 



7.1 The inner and outer rails have been marked with the necessary 

 coding as to whether port or starboard. This appears on the 

 outer rails on the bow end. They are marked "front rail 

 starboard" - "front rail port" - "aft rail starboard" or 

 "aft rail port". Figure C-19. The inner rails are the long 

 30"-high rails. The outer rails are the shorter 42"-high rails. 



7.2 Install the inner rails inboard of the craft in the deck flanges 

 provided, making sure that they are firmly in place. 



NOTE: When installing the inner rail with the stern light 

 attached, feed through the electrical plug through 

 the deck fitting. 



7.3 Using an Allen wrench, secure all the deck flanges with the 

 locking screws provided. 



7.4 Install the outer 42" high rails in the deck flanges provided 

 and repeat the previous procedure, finally locking them in 

 place on both sides. 



98 



