HATCH LOCKS 



There are six locks provided with keys which lock all the 

 hatches and all keys are interchangeable. 



LAUNCHING THE BOAT 



9.1 Remove the turn buckle tie downs and put these aside. Back the 

 trailer into the water as far as possible and launch the boat. 



9.2 When the boat is launched and the trailer is removed from 

 the water, place the two engine boxes in their respective 

 places on the trailer and secure the davit and stiff leg in 

 their proper places on the trailer. Pick up turn buckle tie 

 down assemblies. 



10. THE WORK PLATFORM 



10.1 The work platform can be placed on the bow, either port or 



starboard, and can be retracted by pivoting backwards aft in 

 a stowable position on deck and kept on the boat if desired. 

 If not desired, it can be completely removed by removing the 

 toggle pins that secure it in place. Figures C-20 and C-21. 



Caution: When using the work platform, make sure that the foot 

 that contacts the hull is lowered into position before stepping 

 on the platform. 



11. RETRIEVING THE BOAT 



11.1 Prior to retrieving the boat, remove from the trailer the two 

 engine boxes and davit and stiff leg support and lay these 

 aside . 



11.2 Lower the trailer into the water as far as possible. 



11.3 Line up the boat with the trailer and run it up on the trailer 

 by the use of the engines as far as it will go. 



11.4 Attach the winch line to the towing eye on the center hull, 

 and, by the use of the winch, winch it up approximately 2" 

 away from its full forward position and remove the craft out 

 of the water. 



99 



