Schiebe, F.R., "The Measurement of the Cavitation Susceptability of Water 

 Using Standard Bodies," Report 118, St. Anthony Falls Hydraulic 

 Laboratory, University of Minnesota (1972). 



Silberman, E., "The Use of Equivalent Gas Bubble Nuclei to Measure the 



Cavitation Susceptability of Water," 14th International Towing Tank 

 Conference, Ottawa, Vol. 2, pp. 248-251 (1975). 



Takahashi, H. , "Appendix 2 — Basic Mechanisms of Cavitation Inception," 

 14th International Towing Tank Conference, Ottawa Proceedings VII, 

 pp. 53-75 (1975). 



Van Driest, E.R. and C.B. Blumer, "Boundary Layer Transition: Freestream 

 Turbulence and Pressure Gradient Effects," American Institute of 

 Aeronautics and Astronautics Journal, Vol. 1, No. 6, pp. 1303-1306 

 (1963). 



Van Ingen, J.L., "On the Calculation of Laminar Separation Bubbles in Two- 

 Dimensional Incompressible Flow," in AGARD CP-168 "Flow Separation," 

 Gottingen (1975). See also Paper 20 AGARD Proceedings 224, 

 "Transition, Pressure Gradient, Suction, Separation and Stability 

 Theory" (1977). 



van der Meulen, J.H.J. , "The Influence of Polymer Injection on Cavitation," 

 Conference of Cavitation, Heriot-Watt University, Institute of 

 Mechanical Engineering, London (1974). 



van der Meulen, J.H.J. , "Holographic Study of Polymer Effect on 



Cavitation," Polyphase and Cavitation Forum, American Society of 

 ' Mechanical Engineers, New Orleans. See also, "A Holographic Study of 

 Cavitation on Axisymmetric Bodies and the Influence of Polymer 

 Additives," Publication 509, Netherlands Ship Model Basin, Wageningen, 

 Netherlands (1976). 



van der Meulen, J.H.J. , "A Holographic Study of the Influence of Boundary 

 Layers and Surface Characteristics on Incipient and Developed 

 Cavitation on Axisymmetric Bodies," 12th Symposium on Naval 

 Hydrodynamics, Washington, D.C. (1978). 



102 



