embedment anchi 



One 30-ft 2-1/2-in. clum 



^\ One 35-ft (11 m) 2-1/2 -in. (65 mm) swivel chain 

 One 45-in. 2-1/2-in. (64 mm) chain 



^D = 



General Notes 



ichors depend on buoy location. 

 Positions of buoys as shown are suggested locations only. 



2. Additional wire rope will be necessary between buoy and load 

 equalizer to prevent submergence of buoy if small buoys are used 

 at the temporary site. 



3. Clfhodic protection not shown for clarity. 



4. Make connections in a regular leg as fallows 



> ".rung link connection between swivel shot jnd halr-^hot; 



b. connect W/4-inch (44 mm) wire rope open sockei directly to ends 



c. shackle equalizer to 30 feet (9 m) of chain rising to buoy; 

 .1 connect riser chain to buoy with joining link. 



Use added anchor and connections for a turning leg as Follows: 



!>. jdil third anchor with cable and 35 feet (11 m) swivel shot of chain; 

 b. add ground ring above equalizer, shackle to equjlizcr, connect third 



anchor chain and riser chain to gtound ring bv joining links 



^^ 



Figure 6. Propellant anchor 



ring leg general layout. 



