TABLE XIV Continued 



System and Color 



51. Furan (gray) 



Flame- sprayed alumimim wire 

 Furan finish 



52. Neoprene brushing composition (black' 

 Synthetic rubber primer 



Neoprene finish plus accelerator 



53. Neoprene brushing composition (black) 



MIL-C-I5328 (Formula 11?), pretreatment primer 

 Synthetic rubber primer 

 Neoprene finish plus accelerator 



5^+. Neoprene brushing composition (black) 

 Flame-sprayed zinc wire 

 Synthetic rubber primer 

 Neoprene finish plus accelerator 



55 • Neoprene brushing composition (black) 

 Flame-sprayed aluminum wire 

 Synthetic rubber primer 

 Neoprene finish plus accelerator 



No. of 



Thickness 



Coats 



(mi 



Is) 



1 





3.0 



3 





U.O 





Total 



7.0 



2 





3.0 



3 





5.0 





Total 



8.0 



1 





0.5 



2 





3.0 



3 





5.0 





Total 



8.5 



1 





3.0 



1 





1.0 



3 





6.0 





Total 



10.0 



1 





3.0 



1 





1.0 



3 





6.5 





Total 



10.5 



SERIES 3 



56. Zinc inorganic silicate (gray) 



Zinc inorganic silicate (post-cured) 



Total 



5.0 



5.0 



57. Zinc inorganic silicate (gray) 



Zinc inorganic silicate (post-cured) 

 (Panel contained window)* 



Total 



1^.0 

 l+.O 



58. Zinc inorganic silicate (gray) 



Zinc inorganic silicate (post-cured' 

 (Panel contained window)* 



Total 



5.0 

 5.0' 



*Before coating, a piece of 1-inch by 6-inch masking tape was applied to 

 the middle of the tidal zone on one face of these sandblasted panels. After 

 the coatings were cured, the masking tape was removed leaving a "window" of 

 uncoated sandblasted metal to be exposed to the tidal environment. 



A-24 



