REFERENCES (Cont'd) 



Kallstenlus, T, (1958) Mechanical disturbances in clay samples taken with piston 

 samplers. Royal Swedish Geotechnical Institute Proceedings, No. 16, 

 75 p. 



Keller, G., Richards, A. F., and Recknagel, J. H. (in press) Prevention of water 

 loss through CAB sediment core liners. Deep-sea Research . 



Kullenberg, B. (1947) The piston core sampler . Svenska Hydrografisk-Biologlska 

 Kommissionens Skrifter, Tredje serien: Hydrografi, Band 1, Hafte 2, 

 p. 1-46. 



- - - (1955) Deep-sea coring. Reports of the Swedish Deep-sea Expedition, 



vol. 4, fasc. 1, p. 35-96. 



Lambe, T. W. (1951) Soil testing for engineers. New York, Wiley, 165 p. 



- - - (1961) A mechanistic picture of shear strength in clay, p. 555-580 in 



Research conference on shear strength of cohesive soils . New York, 

 American Society of Civil Engineers. 



Meyerhof, G.G. (1951) The ultimate bearing capacity of foundations. 

 Geotechnique, vol. 2, p. 301-332. 



Moore, D, G. (1959) Stability of deep-sea sedimentary slopes, p. 474-476 in 

 International Oceanographic Congress preprints. Washington, American 

 Association for the Advancement of Science, 1022 p. 



- - - (in press) Submarine slumps. Journal of Sedimentary Petrology . 



- - - and Richards, A. F. (submitted) Conversion of "relative shear strength" 



measurements by Arrhenius on east Pacific cores to conventional units of 

 shear strength . Geotechnique. 



Newmark, N. M. (1935) Simplified computation of vertical pressures In elastic 

 foundations. University of Illinois Bulletin 33, Engineering Experiment 

 Station Circular No. 24, 19 p. 



Osterberg, J. O. (1957) Introduction, p. 1-7 in Symposium on vane shear testing 

 of soils. American Society for Testing Materials Special Technical 

 Publication No. 193, 70 p. 



65 



