7. Press the key into the keyway or 

 the shaft. Put some high-quality 

 approved oil (MIL-L-6085A, MIL- 

 L-870A, MIL-L-644A) with a vis- 

 cosity index of 70 on the surface 

 of the shaft and the keyway. Put 

 the shaft, as shown, into the 

 rotor spacer and add the spacer. 



Put shaft into the ball bearing 

 in the inner housing. The motor 

 armature is in place when the 

 distance from the inner housing 

 surface to the surface of the 

 rotor spacer is 0.279 ±0.002 

 inch. 



Remove the shaft with spacer 

 and motor armature. 



35 



