37. Mark the possible movement from 

 the compressed coil to the 

 stretched coil on the inner and 

 outer housings. 



<€. 



38. Press the Reali-Slim ball bear- 

 ing (Kaydon bearing no KA040 

 XPO) into the housings so that 

 the noninterrupted part of the 

 bearing separator faces to the 

 coil on the inner housing. Make 

 sure not to transmit pressure 

 or impact through the rolling 

 elements of the bearing while 

 pressing it into the housing. 



39. Put a few drops of high-quality 

 approved oil (see step 7) into 

 the Kaydon bearing. 



40. Put the 0-ring (Parker 

 no 2-155-V747-75) into 

 the groove of the re- 

 taining ring. 



41 . Put a few drops of 

 high-quality oil on 

 the 0-ring surface. 



44 



