2. 



ASSEMBLY PROCEDURE 



Clean all metal surfaces very 

 thoroughly. Make sure that all 

 deposits from previously used 

 liquids such as cutting oils, 

 masking paints, galvanic solu- 

 tions, etc, are removed. 



Put Loctite Quick Set 404 

 Adhesive on the outside diam- 

 eter of two 0-rings (Parker no 

 2-104 V747-75). Push the 

 0-rings into the bore so that 

 they just fit inside. Cover 

 the adhesive bond with Loctite 

 waterproofing solution. 



3a. Shoulder rotate - twist two 

 Teflon-insulated 22-gauge 

 wires together and build a 

 coil with about 25 turns. 



3b. Shoulder pivot - twist three 

 Teflon-insulated 22-gauge 

 wires together and build a 

 coil with about 20 turns. 



52 



