Card 5 (8F10.0) 
PERCNT Percentage of boat length subtracted from longitudinal center of gravity to 
obtain X - point where acceleration computations are made 
JOB CONTROL CARDS FOR PROGRAM PLTHSP 
Job control cards for program PLTHSP which generates CALCOMP plots of time 
histories computed by program MAIN are described in this section. 
Job Control Language Card: 
Job Card 
Charge Card 
REQUEST,TAPE7,HI. 
Comment 
Standard facility card 
Standard facility card 
Tape for CALCOMP plot data 
VSN(TAPE7=CK0323). Volume serial number of tape for 
CALCOMP plot 
ATTACH,CALC936. Attaches CALCOMP library routine 
ATTACH, BINAR,SEFZARNICKPLOTB, Attaches plot program run file 
ID=XXXX. 
LDSET(LIB=CALC936) Loads CALCOMP library routines 
BINAR. Runs plot program 
7/8/9 END OF RECORD 
DATA CARDS 
6/7/8/9 END OF FILE 
INPUT DATA CARDS FOR PROGRAM PLTHSP 
Two or three data cards are made ready by PLTHSP, depending on the options selected. 
Standard input format is employed. A description of the necessary data cards follows. 
Card 1 (8F10.0 Format) 
XAXIS Length of x axis in inches 
YAXISP Height of pitch component axis in inches 
YAXISH Height of heave component axis in inches 
latit Height of lettering in inches 
Card 2 (110 Format) 
IA If=0, no plots for bow acceleration and center of gravity acceleration 
If=1, plots previously mentioned information 
42 
